Log in

***Yealink Support*** · 08-19-2013 05:25 PM

Hi Markus,
1.Sorry currently we don't have such setting to make the beep longer.
But we didn't hear such issue that because of the beep tone is short of DTMF button, that the system can't recognize them correctly.
2. What's the firmware are you using on your T26P? 6.70.0.140?
http://www.yealink.com/Upload/firmware/T....0.140.zip

3. If the problem is still, could you provide PCAP trace, syslog(level 6) and config.bin file to us, so we can analyze why the conference system can't recognize the DTMF?

Before you export the syslog, please set log level as 6, and reboot the phone, then click Start,and reproduce the issue, then click Stop,and export the trace, syslog, config,bin to us.
(About where to export these files, please refer to attached screenshot.)
These three files are very important for us, hope you can kindly understand.
Thanks.

Possibly Related Threads...
Thread:		Author	Replies:	Views:	Last Post
	No dial tone when connecting calls internally	tvettel	0	83	04-17-2024 02:20 PM Last Post: tvettel
	permisson to Call list on t46S ist denied	wolfi30	1	441	03-04-2024 02:08 PM Last Post: wolfi30
	permission denied to call list	wolfi30	0	348	02-23-2024 08:54 PM Last Post: wolfi30
	MP54 Call Forwarding	pureit2018	0	609	11-23-2023 07:58 AM Last Post: pureit2018
	Enhanced DSS Key - Conference Call	joe1st	0	607	11-11-2023 05:27 AM Last Post: joe1st
	Unable to Answer call without pressing Line 1	TheKirbyGroup	0	745	11-03-2023 11:04 PM Last Post: TheKirbyGroup
	Yealink T28 setup audible ring on 2nd incoming call	JeffWilkinson	20	86,941	10-18-2023 12:59 PM Last Post: sles
	Picking up a call does not display Caller's Name	oliv	0	1,372	04-19-2023 04:25 PM Last Post: oliv
	Yealink T27P -Incoming call issue	rsarceno	0	1,312	01-25-2023 08:54 AM Last Post: rsarceno
	T27G call foward all	Aerium	0	1,387	09-13-2022 04:36 PM Last Post: Aerium

Threaded Mode \| Linear Mode Longer DTMF Tone for call bridges T26P
Author	Message