[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Multicast paging worked but no longer works
Author Message
CWR Offline
Moderator
*****

Posts: 716
Joined: May 2013
Reputation: 7
Post: #2
RE: Multicast paging worked but no longer works
check the audio codec in use as the static ip vs dhcp ip should not matter. multicast is using a different address range - right? ie: 239.0.0.1:50001


Code:
################################################################################​#######
##                              Multicast                                            ##                                            
################################################################################​#######

#Configure the codec of multicast paging.
multicast.codec = PCMU

#Enbale or diable the phone to handle the incoming multicast paging calls when there is a multicast paging call on the phone; 0-Disabled, 1-Enabled (default);
#If enabled, the phone will answer the incoming multicast paging call with a higher priority and ignore that with a lower priority.
multicast.receive_priority.enable = 0

#Configure the priority of multicast paging calls. It ranges from 0 to 10.
multicast.receive_priority.priority = 0

#Configure the listening multicast IP address and port number for the phone. X ranges from 1 to 10.
#multicast.listen_address.X.ip_address =
multicast.listen_address.1.ip_address = 239.0.0.1:50001

#Configure the lable displayed on the LCD screen when receiving the multicast paging. X ranges from 1 to 10.
#multicast.listen_address.X.label =
multicast.listen_address.1.label = PAGE
(This post was last modified: 08-13-2013 03:21 AM by CWR.)
08-13-2013 03:20 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Multicast paging worked but no longer works - CWR - 08-13-2013 03:20 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Multicast / Paging / Intercom - Yealink T58 Ryandh 20 30,570 04-30-2020 03:23 PM
Last Post: Chris708
  Multicast Paging - Metaswitch EPP missing "Channel" ahull 1 2,421 11-27-2018 12:57 PM
Last Post: ahull
  MultiCast Paging CP860 admin.calgary.demac 4 7,966 09-02-2018 04:34 AM
Last Post: Infotec
  T27G no longer option to transfer call during ringing state DmitryTsyganov 1 3,080 04-16-2018 11:16 AM
Last Post: Travis_Yealink
  Multicast options not in manual USTI 1 3,171 01-18-2018 10:22 AM
Last Post: complex1
  Multicast/Intercom Philip954 5 8,348 09-02-2017 09:01 PM
Last Post: Ryandh
  Multicast Paging force speaker jolouis 6 9,459 10-14-2016 10:15 PM
Last Post: jolouis
  Yealink T28p no longer working after CudaTel firmware update AshElsayid 1 5,634 01-20-2015 08:52 PM
Last Post: James_Yealink
Information T28P Multicast Paging Volume fdtcloud 1 5,852 10-09-2014 08:14 PM
Last Post: Wilson_Yealink
  Muticast paging issues RyanW 5 12,497 02-25-2014 09:38 PM
Last Post: RyanW

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication