[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Turn on MUTE when a call is established using Action URL and URI not successful
Author Message
acpan Offline
Junior Member
**

Posts: 2
Joined: Jul 2013
Reputation: 0
Post: #1
Turn on MUTE when a call is established using Action URL and URI not successful
Hi,

T20P
Firmware Version 9.70.0.140
Hardware Version 7.0.1.62

Q1. I want to turn on MUTE when a call is established. I thinking
of putting the following in the Action URL's Call Established Field:

http://admin:admin@$ip/cgi-bin/ConfigManApp.com?key=MUTE

where $ip is the IP address of the T20P which will be dynamically replaced by the OS of the T20P. Is it possible ? or Should the $ip be replaced with 127.0.0.1 ? I tried both, does not seems to work.

Q2. Is Action URI supported by the T20P ? How do i verify it ? I try sending the Action URI on the web browser:

http://admin:admin@192.168.1.105/cgi-bin...m?key=MUTE

But it does not seems to affect the T20P when a call is on going.

Thanks!
07-29-2013 11:39 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Turn on MUTE when a call is established using Action URL and URI not successful - acpan - 07-29-2013 11:39 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T22P Action URI ATrans and BTrans not working? DaveThompson 2 4,115 09-10-2019 10:47 AM
Last Post: DaveThompson
  Call forwarding with SIP devices Yealink and Cisco Call Manager CUCM joao.schlemm 7 9,809 08-03-2018 08:03 PM
Last Post: MarkLReed
Photo Yealink T21P E2 displays VIA and FROM headers on incoming call DmitryTsyganov 1 2,031 07-12-2018 07:28 PM
Last Post: johnkiniston
  [BUG?]Screen backlight turn on on SIP Keep alive Kaya84 9 9,614 03-29-2018 08:27 PM
Last Post: Travis_Yealink
  T21P-E2 sends a CANCEL to put a call in hold Diego Juan 0 1,505 03-23-2018 02:52 PM
Last Post: Diego Juan
  Call Queue not working with the Grandstream UCM6202 ttran 8 8,232 03-04-2018 06:42 PM
Last Post: Adnanka
  T29G DSSKey functionality alternative number call AresK 4 3,292 12-13-2017 06:56 AM
Last Post: Evan_Yealink
  When I call outside, there's no call waiting tone highlander 3 3,091 11-15-2017 04:04 PM
Last Post: highlander
  Call Forward on T21P E2 not working gradash 8 9,253 05-23-2017 09:44 PM
Last Post: jolouis
  Call Queue not working with the Grandstream UCM6202 ttran 0 2,315 05-04-2017 05:48 PM
Last Post: ttran

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication