blockout

[charlotteinternet]

Ok - well I went back and tried your suggestion and you were right. Before I did (areacode)xxxxxxx instead of (xxxxxxxxxx). 3 digits work. Thanks for the correction.

---

There are only 10 entries in the Phone itself. I can update the block.cfg and push the information to the phones during updates. Can I set more than 10 block outs? For example I use the following scheme of ext's on my hosted platform - 100, 200, 300, 400, 500, (skip 600), 700, 800 (skip 900 due to emergency calls) and then start with 1000, 2000, 3000, 4000, 5000, 6000, 7000, 8000, 9000)

If client is using ext 100 - I would push out the following block (xxxx, 2xx, 3xx, 4xx, 5xx, 6xx, 7xx, 8xx)

However if I use 4 ext's for any given client - I would have to push out the following block (1xx,2xx,3xx,4xx,5xx,6xx,7xx,8xx,2xxx,3xxx,4xxx,5xxx,6xxx,7xxx,8xxx,9xxx) This would be 16 blocks.

My question, can I push out more than 10 blocks on in the block.cfg

This is what I see in the Config.File
[ BlockOut ]
path = /config/DialRule/BlockOut.cfg
#Set Block Out number.
1 =
2 =
3 =
4 =
5 =
6 =
7 =
8 =
9 =
10 =