[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G TIME Calculation Problem
Author Message
briankelly63 Offline
Member
***

Posts: 55
Joined: Jul 2013
Reputation: 1
Post: #3
RE: T46G TIME Calculation Problem - VIDEO sent to Support
This is a nasty little bug that changes depending what you do in the UI screen. It is also dependent on whether the phone is configured or not.

I am using the same firmware as you.

If I try and set the values to the same exact values that are included in your picture and then hit Confirm two things happen. The first is that the day changes from 25 to 26 and the Hour changes to 0.

Please look at the attachment.

I just tried the same thing with another T46G running the same firmware and it INITIALLY it worked properly.

BUT If you change the DHCP Time setting on the time screen or change the Date Format from YYYY-MM-DD to WWW-MM-DD and then try to store a 23 in the hour box lots of strange things start to happen

So I did a factory reset on the phone in question and then re-tested. The time setting then works correctly BUT If I Import the previously Exported configuration the problem returns.

So it would seem there is a corruption issue that is preserved during an Export - Import.

I did another factory reset but DID NOT reload my configuration. In this case the settings work properly and the UI allows me to set 23 as the hour no matter what the other settings happen to be.

I will send you the config.bin that I am using so you can load it and test what is happening.

Something is being corrupted by my configuration. The only unusual thing in my configuration is that I have a VPN file set loaded. It is NOT enabled but it is loaded.

CONFIG.BIN FILE HAS BEEN SENT TO YOUR SUPPORT EMAIL ALSO INCLUDED IS A VIDEO OF THE ISSUE


Attached File(s) Thumbnail(s)
   
(This post was last modified: 07-25-2013 10:18 PM by briankelly63.)
07-25-2013 08:54 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: T46G TIME Calculation Problem - VIDEO sent to Support - briankelly63 - 07-25-2013 08:54 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Problem with BW directory privacy Jorge Luis 0 776 06-29-2021 02:04 AM
Last Post: Jorge Luis
  W80 - Problem with sync level Samy_Lahmar 1 2,417 02-18-2021 07:01 AM
Last Post: bitblock
  PROBLEM AFTER UPDATE W80B TreIngenia 1 3,317 06-26-2020 02:38 PM
Last Post: Yisroel_MongoTEL
  Problem with phones certificate proof 3 5,216 05-26-2020 02:36 PM
Last Post: Lewis-H
  V83 and openvpn problem avayax 10 11,448 05-05-2020 10:44 AM
Last Post: ipcsolutions
  Versions (T46G) 28.83.0.55 sfrazier 2 2,812 01-08-2020 10:08 PM
Last Post: jolouis
  Possible to have T27P switch back to first page of DSS Keys after a period of time? Bobcat19 2 5,747 11-13-2019 07:37 AM
Last Post: Ajani_Exetel
  BLF stop to work after undefined time on SIP-T29G econnet 1 3,479 06-30-2019 03:33 AM
Last Post: Jensen_Yealink
Question How to optimize T46G? kubi 2 5,886 02-05-2018 02:48 PM
Last Post: Sbo
  My Yealink Elite VP-2009 having this problem Muhammad Umair 1 4,107 11-07-2017 03:44 AM
Last Post: Lucia_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication