Can't Auto Provision W52P

[stevez]

Hi Administrator,
1. Yes, after auto provisioning failed using the preloaded firmware, I searched on the forum and found 25.30.0.29.
I installed it and tried auto provisioning again and it failed. When it failed after the upgrade, I used the Pcap feature to see what was going on. I noticed that it was looking for "/<MAC address>.cfg". I compared to a previous problem I had with provisioning the T46G, it is the same problem where (when failing) was looking for "/<MAC address>.cfg". I found and upgraded the firmware to 28.71.0.85. After that upgrade, I used Pcap and saw that after logging in to the ftp it was looking for "<MAC address>.cfg" and successfully provisioned (except for finding the firmware using "firmware.url = ").
1a. Curious, why would the latest firmware not be available on the product information page where we would normally download the firmware?

2. I can send you my current cfg to the email provided. Right now, it is simply the account 1 settings and a couple network settings.
But the issue I see is, the phone adds an unnecessary / before the config file name. Therefore, not able to find the .cfg file on the ftp.

3. Yes, I put "firmware.url = " in my config. The current firmware is the latest(?) at the time ver. 28.71.0.85. I found searching through the forums..maybe 2 or 3 weeks ago. In the Pcap, I see the same little "/" before the file name and the response saying that it doesn't exist. As for the rest of the config information, the firmware (28.71.0.85) provisions fine.

In a nutshell, I can't auto provision the phone is looking for "/<MAC address>.cfg". I CAN auto provision when the phone is looking for "<MAC address>.cfg". And same goes with the firmware.url portion as well. No /, please. My files are not in a different directory on the ftp than what the user logs in to.