[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
A huge number of suggestions
Author Message
Mauro Offline
Member
***

Posts: 58
Joined: Nov 2012
Reputation: 1
Post: #5
RE: A huge number of suggestions
Thank you very much.

About question 10, I think that will be okay, thank you!
(Just a curiosity... why does the original message say "Busy here" and not simply "Busy"? Does it have some particular meaning that I don't know?)

About question 4... I have to say I didn't notice that I had that "custom softkey" option disabled, and thus what I saw in the tables below was ignored. OOOPS!!! And I would have not expected that the default values in the tables ("hold" in this case), were not the same actions used when the custom softkey option is disabled ("swap" in this case) (anyway, I should check my provisioning file before, to be sure that values have not been provided by it) - UPDATE: checked re-applying autoprovisioning file: my provisioning did not change that.

Now I have to take a look to the provisioning manual, to find out how to enable "custom softkey" option for all my users.
Hoping that one is the only thing that automatically changes by enabling that function!

PS: Now I want to check what's the difference between "swap" and "call switch".
UPDATE: Okay, I've understood: If you are talking with A and have B in "hold", pressing SWAP will immediately cause you talk with B and place A on hold..... pressing "SWITCH", instead, will simply do like pressing "up" or "down" key: the display will move to show the B call infos and the "RESUME" button will appear, but you still continue to talk with A if you don't press further buttons.

PPS: If you have some solution also for some other items of the list, feel free to reply! Smile
(This post was last modified: 11-29-2012 11:09 PM by Mauro.)
11-29-2012 03:40 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
A huge number of suggestions - Mauro - 11-21-2012, 04:05 PM
RE: A huge number of suggestions - Larry - 11-27-2012, 06:02 PM
RE: A huge number of suggestions - Mauro - 11-28-2012, 12:20 AM
RE: A huge number of suggestions - Mauro - 11-29-2012 03:40 PM
RE: A huge number of suggestions - Mauro - 11-30-2012, 09:22 PM
RE: A huge number of suggestions - Mauro - 12-03-2012, 05:55 PM
RE: A huge number of suggestions - Mauro - 12-10-2012, 07:11 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Multicast time-to-live from 1 to 33 or a higher number than 1 at least David123321 0 3,761 10-09-2018 05:20 PM
Last Post: David123321
  LDAP phonebook search for number types StefanL 6 10,755 08-09-2017 09:10 AM
Last Post: StefanL
  Suggestions: Adjustable Phone Stand / Bluetooth / Footprint Keith7 1 5,073 04-07-2017 03:10 AM
Last Post: Quinlan_Yealink
  Increase number of remote phone books tsukraw 2 7,439 11-16-2015 09:45 PM
Last Post: tsukraw
  Setup dial number in phone to use multicast paging rlsabin 2 9,112 10-17-2013 02:05 AM
Last Post: rlsabin

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication