[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Unable to register phone on Zultys MX250 r8.0.3: SIP 400 Error
Author Message
IsaacSchneider Offline
Junior Member
**

Posts: 10
Joined: Jun 2013
Reputation: 0
Post: #9
RE: Unable to register phone on Zultys MX250 r8.0.3: SIP 400 Error
I am curious, At first glance it looks like only the User-Agent field had changed between the versions. Can you give some release notes or is this a test build?

After a second to test the phone I found a problem. When dialing out the call would get to 100 Trying back from the pbx but then it would timeout. If this helps I have included a pcap of the call flow below.

From my past experience I tinkered a bit and changed two settings. First I changed the Local SIP port on Account1 to use 5060 (I have seen this with other SIP phones cause problems). Second I removed the G722 from the codec list on Account1. The Zultys doesn't support g722 natively. After that I was able to successfully place a call.

Even though the use of a port other than 5060 on the phone is legal according to RFCs. I have seen this cause problems on many other systems and routers with SIP-ALG. Can you set the default to port 5060 for all accounts (the current is 5062).

Also can you remove g722 from the default codec list. As most of the PBXs I have seen do not support that codec natively. I think if you are limiting the default codec list. The list should only contain g711 a/u only. I know this should work if you offer a list the to ends should just negotiate the list. I blame Zultys for this one but have seen the same behavior on other pbx systems.

Thanks,
Isaac

==========================================
Warning! Gibberish below
==========================================
1 SIP 192.168.1.113:5062 192.168.1.250:5060 Rx 6/19/2013 5:34:56 PM
INVITE sip:500@192.168.1.250:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.1.113:5062;branch=z9hG4bK1048703307
From: <sip:isaacschneider@192.168.1.250>;tag=1657902058
To: <sip:500@192.168.1.250>
Call-ID: 1478442744@192.168.1.113
CSeq: 1 INVITE
Contact: <sip:isaacschneider@192.168.1.113:5062>
Content-Type: application/sdp
Allow: INVITE, INFO, PRACK, ACK, BYE, CANCEL, OPTIONS, NOTIFY, REGISTER, SUBSCRIBE, REFER, PUBLISH, UPDATE, MESSAGE
Max-Forwards: 70
User-Agent: Yealink SIP-T46G 28.71.0.85
Supported: replaces
Allow-Events: talk,hold,conference,refer,check-sync
Content-Length: 308

v=0
o=- 20002 20002 IN IP4 192.168.1.113
s=SDP data
c=IN IP4 192.168.1.113
t=0 0
m=audio 11784 RTP/AVP 0 8 18 9 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:9 G722/8000
a=fmtp:101 0-15
a=rtpmap:101 telephone-event/8000
a=ptime:20
a=sendrecv

2 SIP 192.168.1.250:5060 192.168.1.113:5062 Tx 6/19/2013 5:34:56 PM
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 192.168.1.113:5062;branch=z9hG4bK1048703307
From: <sip:isaacschneider@192.168.1.250>;tag=1657902058
To: <sip:500@192.168.1.250>;tag=1962-zultys--10359999761341_2581221965-1341
Call-ID: 1478442744@192.168.1.113
CSeq: 1 INVITE
Server: Zultys MX250 v8.0.3 build 1
Content-Length: 0" 11DHW-00-00001-2A2

3 SIP 192.168.1.250:5060 192.168.1.113:5062 Tx 6/19/2013 5:34:56 PM
SIP/2.0 401 Unauthorized
Via: SIP/2.0/UDP 192.168.1.113:5062;branch=z9hG4bK1048703307
WWW-Authenticate: Digest realm=""192.168.1.250"",nonce=""MX250:2581227489"",algorithm=MD5,qop=""auth"",opaque=""MX250:2581227489""
From: <sip:isaacschneider@192.168.1.250>;tag=1657902058
To: <sip:500@192.168.1.250>;tag=1962-zultys--10359999761341_2581221965-1341
Call-ID: 1478442744@192.168.1.113
CSeq: 1 INVITE
Contact: sip:500@192.168.1.250:5060
Server: Zultys MX250 v8.0.3 build 1
Content-Length: 0

4 SIP 192.168.1.113:5062 192.168.1.250:5060 Rx 6/19/2013 5:34:56 PM
ACK sip:500@192.168.1.250:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.1.113:5062;branch=z9hG4bK1048703307
From: <sip:isaacschneider@192.168.1.250>;tag=1657902058
To: <sip:500@192.168.1.250>;tag=1962-zultys--10359999761341_2581221965-1341
Call-ID: 1478442744@192.168.1.113
CSeq: 1 ACK
Content-Length: 0

5 SIP 192.168.1.113:5062 192.168.1.250:5060 Rx 6/19/2013 5:34:56 PM
INVITE sip:500@192.168.1.250:5060 SIP/2.0
Via: SIP/2.0/UDP 192.168.1.113:5062;branch=z9hG4bK1219870465
From: <sip:isaacschneider@192.168.1.250>;tag=1657902058
To: <sip:500@192.168.1.250>
Call-ID: 1478442744@192.168.1.113
CSeq: 2 INVITE
Contact: <sip:isaacschneider@192.168.1.113:5062>
Authorization: Digest username=""isaacschneider"", realm=""192.168.1.250"", nonce=""MX250:2581227489"", uri=""sip:500@192.168.1.250:5060"", response=""2e77b011ff72746e00e734c15b27470c"", algorithm=MD5, cnonce=""0a4f113b"", opaque=""MX250:2581227489"", qop=auth, nc=00000001
Content-Type: application/sdp
Allow: INVITE, INFO, PRACK, ACK, BYE, CANCEL, OPTIONS, NOTIFY, REGISTER, SUBSCRIBE, REFER, PUBLISH, UPDATE, MESSAGE
Max-Forwards: 70
User-Agent: Yealink SIP-T46G 28.71.0.85
Supported: replaces
Allow-Events: talk,hold,conference,refer,check-sync
Content-Length: 308

v=0
o=- 20002 20002 IN IP4 192.168.1.113
s=SDP data
c=IN IP4 192.168.1.113
t=0 0
m=audio 11784 RTP/AVP 0 8 18 9 101
a=rtpmap:0 PCMU/8000
a=rtpmap:8 PCMA/8000
a=rtpmap:18 G729/8000
a=fmtp:18 annexb=no
a=rtpmap:9 G722/8000
a=fmtp:101 0-15
a=rtpmap:101 telephone-event/8000
a=ptime:20
a=sendrecv

6 SIP 192.168.1.250:5060 192.168.1.113:5062 Tx 6/19/2013 5:34:56 PM
SIP/2.0 100 Trying
Via: SIP/2.0/UDP 192.168.1.113:5062;branch=z9hG4bK1219870465
From: <sip:isaacschneider@192.168.1.250>;tag=1657902058
To: <sip:500@192.168.1.250>;tag=1963-zultys--10359999761341_2581348541-1341
Call-ID: 1478442744@192.168.1.113
CSeq: 2 INVITE
Server: Zultys MX250 v8.0.3 build 1
Content-Length: 0
06-20-2013 06:13 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Unable to register phone on Zultys MX250 r8.0.3: SIP 400 Error - IsaacSchneider - 06-20-2013 06:13 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T46S Phone doesn't ring - straight to VM - Need it to ring cobregon 0 423 03-07-2024 03:52 AM
Last Post: cobregon
  T46s Veriizon as LAN only phone? Desertfabworks 0 799 08-21-2023 11:31 PM
Last Post: Desertfabworks
  Directory - Remote Phone Book XML Format Cloud9phone 4 18,132 07-28-2023 02:35 AM
Last Post: digiaustin
  Utility to sync outlook contacts with T4x phone tsukraw 4 19,817 07-08-2023 08:16 AM
Last Post: ziksk8
Question I am unable to register a new account under Account -> Register. Chris_Gc 5 3,909 02-09-2023 08:36 PM
Last Post: complex1
  Speed Dial to a specific phone? prestigefac 0 1,186 02-06-2023 12:11 AM
Last Post: prestigefac
  Does T4XU supports DD Phone Feature? kevinschlemmer 0 1,413 12-06-2022 10:48 PM
Last Post: kevinschlemmer
  Transfer error: Not Emergency Call tredd1982 0 2,062 10-28-2022 03:15 AM
Last Post: tredd1982
  T42S unable to update firmware brianstoiber 6 8,228 09-30-2022 05:31 PM
Last Post: complex1
  Yealink T42G Phone stuck at Welcome LFC 12 30,794 08-08-2022 04:16 PM
Last Post: markvdheijden

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication