[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DSSKey and Call Forward
Author Message
Frank Drews Offline
Member
***

Posts: 63
Joined: Jan 2014
Reputation: 0
Post: #18
RE: DSSKey and Call Forward
Hi,

we really would love to have this feature, dircetly accessible to the user. I mean, changing the forward destination ("Forward_always_target") on a DSS-Key, as easy as all the other DSS-Key configurations, which can be done by the user himself, via the phone or via the webinterface of the phone or via provisioning DSS-Keys.

Keep up the great work
Best regards Frank


(11-04-2013 04:43 PM)Yealink Support Wrote:  
(07-22-2013 08:59 PM)industriecontact Wrote:  Dear Yealink Support,

we'd love to see this feature in a future firmware version as well.
Currently there's no way to alter the forward destination than by wading through a set of menu entries.

It would be VERY nice to change the forward destination with a single key stroke or with an action URI.

Please contact your product department repeatedly until they implement this feature! ;-)

Hi industriecontact

You can using action URI to change the forward destination.
1. Please first fill the trust IP address in the phone first.
(Enter the webpage->Phone->Features->Remote Control Security, fill the trust IP address in the "Trusted Action URI Server List")

2. Open a brower, then fill in the below syntax
http://phoneIP/cgi-bin/cgiServer.exx?forward=set&Forward_always_enable=x&Forward_always_target=xxx

[Note]
(1) "forward=set" means this is forward setting, and can be set follow by many & .
(2) You can set many parameters such as: Forward_always_enable、Forward_always_target、Forward_busy_enable、Forward_busy_tar​get、Forward_noanswer_enable、Forward_noanswer_target
(3) Forward_always_enable=x, x=0 means disable always forward; x=1 means enable always forward. And so on.

For example:

http://10.2.20.61/cgi-bin/cgiServer.exx?...target=533

That means always forwards is on and forward to 533.

Hi,

we really would love to have this feature, dircetly accessible to the user. I mean, changing the forward destination ("Forward_always_target") on a DSS-Key, as easy as all the other DSS-Key configurations, which can be done by the user himself, via the phone or via the webinterface of the phone or via provisioning DSS-Keys.

Keep up the great work
Best regards Frank


(11-04-2013 04:43 PM)Yealink Support Wrote:  
(07-22-2013 08:59 PM)industriecontact Wrote:  Dear Yealink Support,

we'd love to see this feature in a future firmware version as well.
Currently there's no way to alter the forward destination than by wading through a set of menu entries.

It would be VERY nice to change the forward destination with a single key stroke or with an action URI.

Please contact your product department repeatedly until they implement this feature! ;-)

Hi industriecontact

You can using action URI to change the forward destination.
1. Please first fill the trust IP address in the phone first.
(Enter the webpage->Phone->Features->Remote Control Security, fill the trust IP address in the "Trusted Action URI Server List")

2. Open a brower, then fill in the below syntax
http://phoneIP/cgi-bin/cgiServer.exx?forward=set&Forward_always_enable=x&Forward_always_target=xxx

[Note]
(1) "forward=set" means this is forward setting, and can be set follow by many & .
(2) You can set many parameters such as: Forward_always_enable、Forward_always_target、Forward_busy_enable、Forward_busy_tar​get、Forward_noanswer_enable、Forward_noanswer_target
(3) Forward_always_enable=x, x=0 means disable always forward; x=1 means enable always forward. And so on.

For example:

http://10.2.20.61/cgi-bin/cgiServer.exx?...target=533

That means always forwards is on and forward to 533.
(This post was last modified: 03-24-2014 08:20 PM by Frank Drews.)
03-24-2014 08:20 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
DSSKey and Call Forward - Kriss - 05-30-2013, 10:51 PM
RE: DSSKey and Call Forward - Kriss - 06-04-2013, 05:23 PM
RE: DSSKey and Call Forward - Kriss - 06-07-2013, 03:45 PM
RE: DSSKey and Call Forward - jasit - 06-25-2013, 11:26 PM
RE: DSSKey and Call Forward - Kriss - 06-25-2013, 11:32 PM
RE: DSSKey and Call Forward - elementpbx - 06-26-2013, 06:32 AM
RE: DSSKey and Call Forward - jasit - 06-29-2013, 05:49 AM
RE: DSSKey and Call Forward - Frank Drews - 03-24-2014 08:20 PM
RE: DSSKey and Call Forward - mkeuter - 07-28-2013, 01:07 AM
RE: DSSKey and Call Forward - Kriss - 10-10-2013, 12:15 AM
RE: DSSKey and Call Forward - jasit - 10-10-2013, 12:38 AM
RE: DSSKey and Call Forward - obram_tp - 11-09-2013, 05:21 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T31, call history, delete old records sles 3 802 01-12-2024 01:33 PM
Last Post: sles
  T30 peer-2-peer call mikrob 2 905 12-10-2023 02:01 AM
Last Post: mikrob
  Dialog-Info Call Pickup Greysi 6 34,072 10-31-2018 03:54 PM
Last Post: cleviton
  Call Park Pickup different with T3x and T2x vondie 21 78,916 01-09-2018 04:45 PM
Last Post: vondie
  TLS - Unauthorized Response To INVITE halts call on TLS close [SOLVED] kg4ysy 10 36,480 06-24-2015 11:11 PM
Last Post: kg4ysy
  T38 Call Park, BLF light stays red mdctech 1 9,844 12-05-2014 07:51 PM
Last Post: Wilson_Yealink
  32.70.1.11, puts call on hold instead of tranfer - Solved jasit 6 20,872 10-22-2014 09:45 PM
Last Post: jasit
  Action URI to hangup call on T3x V70 W3TEL_Support 8 31,418 10-16-2014 08:22 PM
Last Post: Wilson_Yealink
  T38G call back not work tlc 1 9,739 09-01-2014 08:40 PM
Last Post: Wilson_Yealink
  Name column in call list Ruben 1 8,894 09-01-2014 08:28 PM
Last Post: Wilson_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication