[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
data initialising
Author Message
Regend_Yealink Offline
Junior Member
**

Posts: 5
Joined: May 2022
Reputation: 0
Post: #5
RE: data initialising
(03-22-2024 12:31 PM)itemgarage Wrote:  
(09-04-2023 01:51 PM)Regend_Yealink Wrote:  
(08-30-2023 06:23 PM)glennbtn Wrote:  Hi

We have an issue with a W70B base with W73H handset where it keeps saying data initialising

The handset and base are fully up to date on the firmware and the handset is not miles away, probably a couple of meter away so not a distance thing

Can anyone advise?

Thanks

Hi Glennbtn,

Please kindly confirm if the W73H handset is displayed as registered on the web interface of the W70B base. The "data initialising" indicates that it is attempting to connect to the base, however frequently showing this indicates connection unstable between the handset and the base.

Thanks.
connections game
Best Regards,
Regend Soh | Sr. Sales Engineer | Yealink

That's right. I also had this problem before and my connection was unstable. After a while, I replaced the base and the connection was stable again. You have a very precise perspective

Hi

Glad to hear that it works for you!

Best Regards,
Regend Soh | Sr. Solution Engineer | Yealink
03-22-2024 12:47 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
data initialising - glennbtn - 08-30-2023, 06:23 PM
RE: data initialising - Regend_Yealink - 09-04-2023, 01:51 PM
RE: data initialising - cfpisupport - 01-02-2024, 10:59 PM
RE: data initialising - itemgarage - 03-22-2024, 12:31 PM
RE: data initialising - Regend_Yealink - 03-22-2024 12:47 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Can you recover contacts/data after a factory reset? stephensautoglass 2 4,204 12-09-2022 12:19 AM
Last Post: stephensautoglass
  T54W Stuck initialising - need recovery FW ability_cn 1 12,045 09-10-2021 09:07 PM
Last Post: Ken2929
  Insuficient number of data ports for ipphones/computers ittechnicianbasko 1 8,155 08-19-2015 04:43 AM
Last Post: CWR

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication