[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T21P E2 attended transfer caller id name in history
Author Message
JeffreyFisher Offline
Junior Member
**

Posts: 1
Joined: Aug 2023
Reputation: 0
Post: #4
RE: T21P E2 attended transfer caller id name in history
(09-11-2019 05:20 AM)Leonard9 Wrote:  Ensure that the phone is running on the required firmware by 3CX. In case the device needs manual updating download the latest distributed required firmware by 3CX here subwaylistens. Read how to check what firmware the phones are running on and how to upgrade.

According to the Yealink Forums thread you linked to, the following config parameters need to be changed in order to show the original caller ID name in the history of a call that was transferred:

features.save_init_num_to_history.enable must be set to 1.
account.1.refresh_remote_id.enable must be set to 1.
account.1.cid_source must be set to 4.
account.1.cp_source must be set to 0.
account.1.transfer_refer_to_contact_header.enable must be set to 1.
You can find these parameters in the sip.cfg file on the Yealink T21P E2 phone.

Here are the steps on how to change these parameters:

Log in to the phone's web management interface.
Click on the "Configuration" tab.
Click on the "SIP" tab.
Scroll down to the "Account 1" section.
Find the following parameters:
features.save_init_num_to_history.enable
account.1.refresh_remote_id.enable
account.1.cid_source
account.1.cp_source
account.1.transfer_refer_to_contact_header.enable
Set each of these parameters to the value specified above.
Click on the "Save" button.
Once you have saved the changes, the original caller ID name will be shown in the history of any call that is transferred.
08-19-2023 04:49 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: T21P E2 attended transfer caller id name in history - JeffreyFisher - 08-19-2023 04:49 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Can't Call Forward Yealink T21P e2 - latest firmware Grace6641 1 7,171 06-18-2019 09:53 AM
Last Post: Walter_Yealink
  Questions about autoprovisioning for T21P E2 Mauro 4 10,141 03-19-2018 01:50 PM
Last Post: Mauro
  T21P E2 and T27P Issues with voice.tone.country Spadhausen 0 4,422 10-03-2017 03:54 PM
Last Post: Spadhausen
  FreePBX EndPoint Manager Provisioning - Yealink T21P-E2 vianneyjs 2 12,215 10-19-2016 09:39 AM
Last Post: Karl_Yealink
  Wrong time with dhcp_time and DST auto - T21P E2 deactavo 1 8,478 10-01-2016 12:20 AM
Last Post: Kevin_Yealink
  Problem with registering T21P E2 with autoprovision Dimitry 2 10,934 09-19-2016 08:31 PM
Last Post: Dimitry
  3CX Phonebook: Selection of inbound caller names mahe23 2 10,289 01-29-2015 07:53 PM
Last Post: mahe23
  T21P - loading <MAC>.cfg fails filipedilopes 3 11,367 06-24-2014 08:25 PM
Last Post: Yealink Support
  Auto Provisioning and Chunked transfer encoding bearded 10 38,068 05-07-2014 06:59 PM
Last Post: amvalente
  Blind / Attended Transfer via dss key Mattrix 6 16,068 03-27-2014 07:42 PM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication