T54W w/DD10K not registering to RT30

[markvdheijden]

(05-20-2022 01:08 AM)Chris708 Wrote:  I have 3 Yealink T54W's, firmware 96.86.0.45. Each of these has a DD10K plugged in and each is registered to a single/separate W56H handset.

Handset firmware is 61.83.0.90.

I am now trying to register an RT30 to the T54W with the DD10K and neither can see each other.

Powering on the RT30 shows a Green Power light and Orange-flashing DECT light.
*Manual says this is Registering to a Base station
*Manual also says that powering on the RT30 should show a Green Power light with a Red-Flashing DECT light.

The T54W is set to Repeater Mode RT30.

When I Start Reg on the T54W, it just shows Repeater at the top of the screen with a spinning/search circle.

When I quick press the Program key on the RT30, the DECT light goes from flashing-Orange to solid-Red.

Basically, I don't believe I am able to register the RT30 to any of the Yealink T54W's with DD10k.

Looking for your assistance on getting these to register.

As stated in the datasheet the RT30 is compatible with Yealink W60B/W70B/W52 DECT IP Base stations. So I do not think you can register it to a DD10.