[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
W60B Compromised and unable to factory reset
Author Message
Yisroel_MongoTEL Offline
Senior Member
****

Posts: 282
Joined: Jul 2017
Reputation: 13
Post: #4
RE: W60B Compromised and unable to factory reset
Have you tried doing a reset while it's not connected to the internet? The whole time keep it disconnected from the internet until you finish and log in to the phone's Web GUI (while still disconnected from the internet.)

Factory default process:
  1. Power off the unit by unplugging the power cord from the back (for PoE, disconnect the network cable).
  2. Wait for 15 seconds.
  3. With the unit unplugged, press and hold the connect button on the base station.
  4. While still holding the connect button, plug the power (or network cable if PoE) back into the unit.
  5. Wait until all three lights on the unit are showing as solid green, and release the connect button.
  6. Wait approximately 5 minutes.
  7. Reboot the unit by unplugging it from power for 15 seconds and plugging it back in.
01-07-2022 12:22 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: W60B Compromised and unable to factory reset - Yisroel_MongoTEL - 01-07-2022 12:22 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  how to register a T58W with DD10K to a W60B? schogol 6 219 Yesterday 09:54 PM
Last Post: schogol
Smile Unable to save changes on my W70B when using a mobile device WelshPaul 0 469 01-20-2024 08:40 PM
Last Post: WelshPaul
  How to enable web server/ GUI on W60B and W70B after provisioning has disabled it. jhofford 2 2,088 09-12-2023 08:42 PM
Last Post: jhofford
  Problems setting up W60B and interface issues Ness 4 4,878 03-30-2023 05:24 PM
Last Post: Ness
  Auto Provision firmware on W60B base station hospitale 6 5,662 02-15-2023 05:54 PM
Last Post: hospitale
  recovery mode W60B files Aleskey 3 5,269 02-14-2023 01:42 AM
Last Post: 88fingerslukee
  W60B Constantly Restarts When W73H Is Connected. nolto 0 1,563 02-07-2023 12:15 AM
Last Post: nolto
  W60B factory reset and default login carsey 3 5,500 02-01-2023 02:52 AM
Last Post: complex1
  W60B remove intercom when transfert MYCOMPUTING 2 2,554 12-08-2022 12:17 AM
Last Post: complex1
  W60B base With 56H ( incomming calls, no ringing when charging ) stéphane 3 8,677 12-01-2022 03:15 AM
Last Post: therring

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication