T32/T38 template issues with 3CX

[sunstatetech]

Hey, what's up man, long time no talk?

The problem with just replacing the stock image is that opens the doors for 3CX overwriting it down the road, same reason why you modify a copied template and not the original, it will eventually get overwritten by a service pack.

It may be a length issue now that you mention it, because originally I had yealinkt32-custom.png as the name and I couldn't even upload that to the phone manually until I removed the hyphen, so it's obviously picky. What's weird about that though is if you look at the stock wallpapers they have special characters in them "pictures (01)".png.

(05-16-2013 06:16 AM)craigreilly Wrote:  Hey Seth
I just replaced the png file with a new one... with the same name.
You didn't mention what firmware... I have 1 phone right now running 38.70.0.143 and this is what I find in the cfg file for that device:

Code:

################################################################################​#######
##            Configure the access URL of the  Wallpaper and Screensaver             ##                                            
################################################################################​#######


################################################################################​#######
##            Configure the access URL of the  Wallpaper and Screensaver             ##                                            
################################################################################​#######

wallpaper_upload.url = http://10.0.0.12:5000/provisioning/logo/yealinkt38.png
screen_saver.pic.url = http://10.0.0.12:5000/provisioning/logo/yealinkt38.png


#Configure the phone background.
#If you set the custom image (new.png) as phone backgroup, the value is: phone_setting.backgrounds = Config:new.png
#If you set the system image (pictures(01).png) as phone backgroup, the value is: phone_setting.backgrounds = Resource:pictures(01).png



phone_setting.backgrounds = Config:yealinkt38.png

and this is what I have in 3cx:

Code:

################################################################################​#######
##            Configure the access URL of the  Wallpaper and Screensaver             ##                                            
################################################################################​#######
{IF model=Yealink T32}
wallpaper_upload.url = http://%%pbx_ip%%:%%pbx_http_port%%/provisioning/logo/yealinkt32.png
screen_saver.pic.url = http://%%pbx_ip%%:%%pbx_http_port%%/provisioning/logo/yealinkt32.png
{ENDIF}

################################################################################​#######
##            Configure the access URL of the  Wallpaper and Screensaver             ##                                            
################################################################################​#######
{IF model=Yealink T38 v70}
wallpaper_upload.url = http://%%pbx_ip%%:%%pbx_http_port%%/provisioning/logo/yealinkt38.png
screen_saver.pic.url = http://%%pbx_ip%%:%%pbx_http_port%%/provisioning/logo/yealinkt38.png
{ENDIF}

#Configure the phone background.
#If you set the custom image (new.png) as phone backgroup, the value is: phone_setting.backgrounds = Config:new.png
#If you set the system image (pictures(01).png) as phone backgroup, the value is: phone_setting.backgrounds = Resource:pictures(01).png
{IF model=Yealink T32}
phone_setting.backgrounds = Config:yealinkt32.png
{ENDIF}

{IF model=Yealink T38 v70}
phone_setting.backgrounds = Config:yealinkt38.png
{ENDIF}

Seems to be working ok. just fior the heck of it - maybe try a shorter file name? send me your file if you want, and I will try creating a new template and see what happens...