[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Picking up a call does not display Caller's Name
Author Message
oliv Offline
Member
***

Posts: 88
Joined: Feb 2016
Reputation: 1
Post: #1
Picking up a call does not display Caller's Name
Hello,

My setup includes an Asterisk 16 instance with a T53W (96.86.0.70) and a T27G (69.86.0.27).
When a call from "John Doe" <123> comes in and one phone starts to ring, I'm issuing with the other phone, different commands to pick up the incoming call.

1. When I pickup the incoming call pressing a BLF key, I can read "John Doe" and the pickup dialing string on my phone screen. John Doe is isplayed using large letters. Dialing string is displayed with small letters.

2. When I pickup the incoming call dialing the pickup sequence with my phone keypad, I can't read any name on my phone screen but I can read pickup dialing string. Dialing string is displayed with large letters.

3. When I pickup the incoming call dialing the general pickup sequence with my phone keypad, I can't read any name on my phone screen but I can read the general pickup dialing string. Dialing string is displayed with large letters.

At least, pickup works as expected (interceptor can talk to callee) but caller details are lost depending on the used process.

Strangely, SIP signals seem to be the same when comparing 1, 2 and 3: Asterisk replies with 200 OK to Pickup INVITE message. This 200 OK reply embeds a P-Asserted-Identity header with full details on caller (ie name and number).

Asterisk also sends an UPDATE message embedding full details.


A. Can you reproduce this ?
B. Can I change phone settings to get caller's name displayed in all cases ?

Best regards
04-19-2023 04:25 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Picking up a call does not display Caller's Name - oliv - 04-19-2023 04:25 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  permisson to Call list on t46S ist denied wolfi30 1 291 03-04-2024 02:08 PM
Last Post: wolfi30
  permission denied to call list wolfi30 0 231 02-23-2024 08:54 PM
Last Post: wolfi30
  Hiding Inbound Caller ID from External Numbers Jack-Greenhous 1 701 12-14-2023 02:49 AM
Last Post: complex1
  MP54 Call Forwarding pureit2018 0 496 11-23-2023 07:58 AM
Last Post: pureit2018
  Enhanced DSS Key - Conference Call joe1st 0 524 11-11-2023 05:27 AM
Last Post: joe1st
  Unable to Answer call without pressing Line 1 TheKirbyGroup 0 648 11-03-2023 11:04 PM
Last Post: TheKirbyGroup
  Yealink T28 setup audible ring on 2nd incoming call JeffWilkinson 20 86,347 10-18-2023 12:59 PM
Last Post: sles
  Display 0 for line pickup SupportA 0 1,103 07-12-2023 08:51 PM
Last Post: SupportA
  Yealink T27P -Incoming call issue rsarceno 0 1,249 01-25-2023 08:54 AM
Last Post: rsarceno
  number of initial caller of a tranferred cal in history Lichtmacher 0 1,135 12-05-2022 10:35 PM
Last Post: Lichtmacher

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication