[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 1 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Intercom and BLF
Author Message
remingtonsmith Offline
Junior Member
**

Posts: 2
Joined: Oct 2020
Reputation: 0
Post: #5
RE: Intercom and BLF
(11-03-2020 11:37 PM)eric@salemcomputer.com Wrote:  Apologies for the delay! I figured out the answer to this and missed this forum of places to update with the results. The magic config lines that I found on my own that Yealink Support was unable to provide is:

features.intercom.feature_access_code = *5
features.blf.intercom_mode.enable = 1

Obviously replace the number with whatever your controller needs and this made the BLF buttons do exactly what I wanted which is monitor the extension in the Value field but dial as an intercom call when the button is pressed. This also makes it so you can use the buttons for transfers and such since the value does not contain the intercom code.

Hope this helps!

Eric:

Thank you so much for posting this. I spent too many hours simply trying to make a BLF Intercom key (a.k.a. an intercom with presence key). I added the codes you provided and could not get it to work, but it was enough to point me in the direction of some documentation that did get it working for me with my Jive / GoToConnect provider. Ultimately, I needed to add the following codes to the configuration to get this to work with Jive / GoToConnect on Yealink T48S phones:

features.blf.intercom_mode.enable = 1
features.intercom.feature_access_code = *
features.intercom.mode = 1

Yealink must make this feature easier to find and implement.

For Jive / GoToConnect users, these codes must be added to the provisioning template for your account by Jive / GoToConnect technical support. Otherwise, any manual changes to the configuration file on the Yealink phones will be overwritten the next time Jive / GoToConnect reprovisions the phones.

Thanks again Eric!
(This post was last modified: 11-04-2020 01:00 AM by remingtonsmith.)
11-04-2020 12:39 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Intercom and BLF - eric@salemcomputer.com - 05-27-2020, 08:58 PM
RE: Intercom and BLF - Yisroel_MongoTEL - 05-28-2020, 03:27 PM
RE: Intercom and BLF - remingtonsmith - 10-31-2020, 03:30 AM
RE: Intercom and BLF - remingtonsmith - 11-04-2020 12:39 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T4X no beep on intercom answer jcaruso 2 7,358 04-12-2022 04:46 AM
Last Post: JohnJ
  Intercom tone - make louder? imfloridaguy 7 18,022 09-22-2020 06:54 PM
Last Post: Nraphan
Information Increase intercom tone value support@thearcehouse.com 14 30,947 09-22-2020 06:52 PM
Last Post: Nraphan
  Ring Mute while keeping intercom ring on Problemchild 1 8,386 05-09-2018 09:00 AM
Last Post: Kevin_Yealink
  T46G Firmware 28.80.0.60 disables the intercom auto-answer function KenDoerksen 11 34,186 07-28-2017 06:05 AM
Last Post: Lucia_Yealink
  T48G Intercom Auto-answer cm21 14 38,049 03-06-2017 08:48 PM
Last Post: engine411
  Anyone have sucecss using the Intercom with Vonage? saul 4 13,035 02-28-2017 01:36 PM
Last Post: saul
  T46G - - Intercom - Call Barge Issue Abe1048 15 58,711 06-18-2016 04:43 AM
Last Post: davemcbr
  Intercom Barge davemcbr 2 8,539 06-11-2016 04:14 AM
Last Post: davemcbr
  intercom auto-answer T46G to Zultys. dew3flr 1 6,566 01-30-2016 05:35 AM
Last Post: Yealink_Michael

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication