[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46G and PBX Feature Codes
Author Message
tonycolorado Offline
Junior Member

Posts: 3
Joined: Aug 2015
Reputation: 0
Post: #1
T46G and PBX Feature Codes
I am having an issue with not being able to use certain PBX Hosted in-call feature codes through my Yealink T46G. Hoping that someone can point me in the right direction.

I use IncrediblePBX and it features several in-call feature codes - For example
  • *1 Records
  • *2 Initiates an Asterisk assisted transfer
  • ## Initiates a blind transfer

When I enter these codes on a softphone or my GrandStream SIP DECT Phone the proper behavior is triggered (The PBX hears the tones and does what its supposed to do) however when I enter the codes on my Yealink nothing happens EXCEPT when I do *1 to start a recording - that one command works.

To Illustrate, here is what I can do on my Softphone
1) Initiate a call
2) While talking to someone, press ##105 to transfer them to extension 105
3) The caller is transferred
4) Or, while talking to someone I can press *2 to hear a prompt asking me what extension to transfer the caller to. I enter the extension and the caller is transferred

Here is what happens when I try the same thing on my Yealink T46G
1) Initiate a call
2) While talking to someone, press ##105 to transfer them to extension 105
3) The caller is NOT transferred (nothing happens)
4) Or, while talking to someone I can press *2 . Unlike with the Grandstream, I hear no prompt.

It seems that my Yealink is somehow not sending or otherwise intercepting my * and # Keys (except For *1 to initiate a recording - thats the only one that appears to work) - I have validated that both my PBX, PBX Extension Settings for this Phone and YeaLink Config panel are all set to rfc2833

I do realize that my T46G has a built in Call Transfer feature, however I would prefer to use the PBX assited version of this because it enables me to disable the ring tone that transferred callers hear.

Any tips?
(This post was last modified: 08-22-2015 02:26 AM by tonycolorado.)
08-22-2015 02:23 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
T46G and PBX Feature Codes - tonycolorado - 08-22-2015 02:23 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T43U using L2TP VPN feature kaausc 0 366 06-22-2023 02:58 AM
Last Post: kaausc
  Send different codes on keystroke (enable and disable) Marsl84 0 535 04-21-2023 08:15 PM
Last Post: Marsl84
  T46G Multiple EXT Port amandah 2 1,155 04-04-2023 01:06 AM
Last Post: Yisroel_MongoTEL
Photo T46G LED blinks when screen is off W 4 6,924 03-29-2023 05:36 AM
Last Post: matthewchubb
  T46G/S Multicast on PC Port Issue MiKeDaDoC 5 10,274 01-02-2023 01:30 AM
Last Post: kw160008
  Does T4XU supports DD Phone Feature? kevinschlemmer 0 866 12-06-2022 10:48 PM
Last Post: kevinschlemmer
  T46G call completed elsewhere zimbocz 3 8,855 10-28-2022 03:28 AM
Last Post: tredd1982
  T46G SSL 2 & 3 Vulnerability russavd 0 1,009 09-24-2022 05:07 AM
Last Post: russavd
  T46G - shortcut to activate/ deactivate accounts? westats 4 4,100 07-07-2022 11:40 AM
Last Post: westats
  WH63 Connect to T46G 79schultz 1 2,101 07-06-2022 03:08 PM
Last Post: markvdheijden

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication