Prefix and Postfix - T28 and T38

[telepathinc]

WE have accomplished a SMALL Success with this using 2.73.0.16 on T28, but it is NOT the desired outcome.

using 7 as a pre-dial ( I will not call it PREFIX, because that does not work ) and a dial plan of 7(xxx) Replace = $1* = meaning that 7103 would be replaced with 103* and reach VM 103

I can be on a call and press Transfer 7 then DSS/BLF_103 - WAIT for the Transfer SOFTKEY to appear in the display, then Press Transfer Softkey, or hang up.

This works, but is does NOT allow any LABELED key to do this

It will not support a key to do this

You explanation above does NOT support transfer - it only supports a CALL to vm 2113