[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T42S or T23G - busy signal
Author Message
Emir_Sa Offline
Banned

Posts: 4
Joined: Feb 2017
Post: #6
RE: T42S or T23G - busy signal
(03-10-2020 04:24 PM)complex1 Wrote:  
(03-10-2020 08:45 AM)Emir_Sa Wrote:  Hi, Made the changes however it didn't help ... thanks for the suggestion

Hi,

Just checked my phone settings and I have 180 Ring... "Enable" and Caller ID Source "FROM" and have no issues.
I like to suggest to reset the phone to factory default, re-provisioning it, make no changes and try again.
The PBX is responsible for which ringback tone you hear.

Hope this will help.

Hi, i think i tried those variants but i'll do as you say again, if it doesn't work I'll also check the PBX configuration again ... thanks

(03-11-2020 01:55 PM)jolouis Wrote:  
(03-09-2020 12:00 PM)Emir_Sa Wrote:  Hi, i have unusual problem with T42S and T23g series sip yealink .... When I make call to analoge phone, I don't get busy signal ... even in situation when I know that the analog phone is busy, PBX set correctly and the signal I get is ringing

Silly question but is the analog phone configured on the PBX to allow call waiting? If so when you dial it you will always get ringing, even when somebody is already talking on that phone (that's the whole point of call waiting after all). The analog phone or ATA may not be setup to properly notify you (usually with two short beeps) of another incoming call, so maybe you don't realize this is the case?

Hi, analog has one channel and when phone has a call, other phone gets busy signal, in the case of ISDN phones, there are two channels and have waiting option like you saying ...
(This post was last modified: 03-11-2020 08:05 PM by Emir_Sa.)
03-11-2020 07:40 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
T42S or T23G - busy signal - Emir_Sa - 03-09-2020, 12:00 PM
RE: T42S or T23G - busy signal - complex1 - 03-09-2020, 05:07 PM
RE: T42S or T23G - busy signal - Emir_Sa - 03-10-2020, 08:45 AM
RE: T42S or T23G - busy signal - complex1 - 03-10-2020, 04:24 PM
RE: T42S or T23G - busy signal - Emir_Sa - 03-11-2020 07:40 PM
RE: T42S or T23G - busy signal - jolouis - 03-11-2020, 01:55 PM
RE: T42S or T23G - busy signal - Emir_Sa - 03-13-2020, 11:31 AM
RE: T42S or T23G - busy signal - complex1 - 03-13-2020, 12:14 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T42S & T46S On Vonage stratos 1 598 06-16-2022 05:31 PM
Last Post: complex1
  Compatibility T42S with WH62 NikolaB 2 1,034 05-09-2022 10:23 PM
Last Post: NikolaB
  T42S Handset Clips stratos 0 924 01-26-2022 10:34 PM
Last Post: stratos
  Yealink T42S and T42G Phone stuck at Welcome Pierre06 7 4,968 01-10-2022 11:36 PM
Last Post: Pierre06
  T42S How to program envelope key? Fishgfingers 1 2,178 09-04-2021 01:31 AM
Last Post: kapetrosyan
  Bluetooth Headset with T42S hausrocker 0 2,177 03-25-2021 09:34 PM
Last Post: hausrocker
  Creating Pause in Speed Dial on T42S tcodispot 1 2,899 12-16-2020 05:47 AM
Last Post: Yisroel_MongoTEL
  T42S Headset Button Hangup absoffthewake 1 5,228 11-13-2020 09:34 PM
Last Post: smuser
  T42S factory reset without default password JeffWilkinson 12 26,587 11-03-2020 02:26 PM
Last Post: Jay_Yealink
  T42S call log / journal always empty hausrocker 2 4,568 10-08-2020 10:05 AM
Last Post: hausrocker

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication