[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CP960 Not Booting
Author Message
Yisroel_MongoTEL Offline
Senior Member
****

Posts: 275
Joined: Jul 2017
Reputation: 13
Post: #11
RE: CP960 Not Booting
(04-06-2020 08:53 PM)NezarH Wrote:  Thank you for the reply,

Older version seems good idea, however the link is not working (Page error 404 and Chinese language from Yealink site!.

Just take it from the Firmware page:
http://support.yealink.com/documentFront...mentId=197
04-06-2020 09:07 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
NezarH Offline
Junior Member
**

Posts: 13
Joined: Apr 2020
Reputation: 1
Post: #12
RE: CP960 Not Booting
(04-07-2020 10:11 AM)robert110 Wrote:  I encountered the same problem here. After an incomplete upgrade, I could not let the CP960 boot, and now that I am trying to use recovery mode, I tried the method for the attached image, but if I ask, it does work not; What does the firmware update for "USB flash disk" mean? ? Is it possible? What should I do, I would appreciate it. I was listening to someone say English essay help in this method, so what's your opinion.

Finally Good News!

Yealink reply to me previous ticket and sent me link contain Recovery mode process on CP960 (plus other model, seems updated version!) the most important they sent me new files CP960.bin and CP960.rfs which were the main reason for the recovery mode to work this time!

it's working now .

the process :

1- prepear formated usb flash (FAT32)
2-copy the needed files (CP960.bin and CP960.rfs and the CP960.rom) (I have used what yealink tech. sent me) to the flash drive.
3-plug the USB flash drive next to the micro usb
4-switch on the CP960
5-press Home (the circle) when you see "initializing" keep press until you see another screen which will do the recovery automatically ! cant be easier than this .

Thats it .

BIG THANKS TO MongoTEL_Support , and Thank you Yealink Technical Support team.

you saved us!
04-07-2020 07:01 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Mclemmons Offline
Junior Member
**

Posts: 1
Joined: Apr 2020
Reputation: 0
Post: #13
RE: CP960 Not Booting
I have the same issue. I spoke with Yealink tech support via Teams conference call. When I tap the home button, or hold it down, no matter what I do it does not see the USB drive and just hangs on that pic of a phone and a circle spinning.

He also tried to have me hold the 2 mute buttons down on power up for a factory reset...that didn't work either. This is a new phone....so it's very dissapointing that we can't bypass any startup to either reset, or update the firmware (which by the way is the reason we are in this mess in the first place). We updated the firmware last week and the phone won't boot up after the fact.

If there are any other tricks I can try...I am open to any suggestions.

Thanks
04-28-2020 05:09 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
PSS1819 Offline
Junior Member
**

Posts: 9
Joined: Apr 2020
Reputation: 0
Post: #14
RE: CP960 Not Booting
(04-28-2020 05:09 PM)Mclemmons Wrote:  I have the same issue. I spoke with Yealink tech support via Teams conference call. When I tap the home button, or hold it down, no matter what I do it does not see the USB drive and just hangs on that pic of a phone and a circle spinning.

He also tried to have me hold the 2 mute buttons down on power up for a factory reset...that didn't work either. This is a new phone....so it's very dissapointing that we can't bypass any startup to either reset, or update the firmware (which by the way is the reason we are in this mess in the first place). We updated the firmware last week and the phone won't boot up after the fact.

If there are any other tricks I can try...I am open to any suggestions.

Thanks

Power cycle the phone and as soon you see the first initializing... press and hold the circle button until the screen turns blue.
There is a very short time frame. If you are not fast enough, try again.
04-28-2020 06:16 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
NezarH Offline
Junior Member
**

Posts: 13
Joined: Apr 2020
Reputation: 1
Post: #15
RE: CP960 Not Booting
(04-28-2020 06:16 PM)PSS1819 Wrote:  
(04-28-2020 05:09 PM)Mclemmons Wrote:  I have the same issue. I spoke with Yealink tech support via Teams conference call. When I tap the home button, or hold it down, no matter what I do it does not see the USB drive and just hangs on that pic of a phone and a circle spinning.

He also tried to have me hold the 2 mute buttons down on power up for a factory reset...that didn't work either. This is a new phone....so it's very dissapointing that we can't bypass any startup to either reset, or update the firmware (which by the way is the reason we are in this mess in the first place). We updated the firmware last week and the phone won't boot up after the fact.

If there are any other tricks I can try...I am open to any suggestions.

Thanks

Power cycle the phone and as soon you see the first initializing... press and hold the circle button until the screen turns blue.
There is a very short time frame. If you are not fast enough, try again.


As PSS1819 said, be quick and keep press until it detect the usb flash and recovery mode will start automatically!

Steps :

1- prepare formatted usb flash (FAT32)
2-copy the needed files (CP960.bin and CP960.rfs and the CP960.rom) (I have used what yealink tech. sent me) to the flash drive.
3-plug the USB flash drive next to the micro usb
4-switch on the CP960
5-press Home (the circle) when you see "initializing" keep press until you see another screen which will do the recovery automatically !.

Good luck.
04-29-2020 04:44 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
starflash Offline
Junior Member
**

Posts: 1
Joined: Oct 2020
Reputation: 0
Post: #16
RE: CP960 Not Booting
NezarH,

Care to share these new cp960 rfs and bin files? I am having the same issue?
11-03-2020 12:32 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
matthewmilesuk Offline
Junior Member
**

Posts: 1
Joined: Apr 2022
Reputation: 0
Post: #17
RE: CP960 Not Booting
I'm in a similar position. The default admin credentials don't work for a brand new CP960... hoping to upgrade the firmware to another version to see if this will make a difference.

I've tried the .ib and .rfs files attached to a previous reply in this thread, with a variety of .rom files from the support pages for the CP960 but none of them have worked so far.

Does anyone have a working set of recovery files I can try please?

Thanks

Matt
04-29-2022 09:56 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
20chakar Offline
Junior Member
**

Posts: 1
Joined: Oct 2022
Reputation: 0
Post: #18
RE: CP960 Not Booting
(04-07-2020 07:01 PM)NezarH Wrote:  
(04-07-2020 10:11 AM)robert110 Wrote:  I encountered the same problem here. After an incomplete upgrade, I could not let the CP960 boot, and now that I am trying to use recovery mode, I tried the method for the attached image, but if I ask, it does work not; What does the firmware update for "USB flash disk" mean? ? Is it possible? What should I do, I would appreciate it. I was listening to someone say English essay help in this method, so what's your opinion.

Finally Good News!

Yealink reply to me previous ticket and sent me link contain Recovery mode process on CP960 (plus other model, seems updated version!) the most important they sent me new files CP960.bin and CP960.rfs which were the main reason for the recovery mode to work this time!

it's working now .

the process :

1- prepear formated usb flash (FAT32)
2-copy the needed files (CP960.bin and CP960.rfs and the CP960.rom) (I have used what yealink tech. sent me) to the flash drive.
3-plug the USB flash drive next to the micro usb
4-switch on the CP960
5-press Home (the circle) when you see "initializing" keep press until you see another screen which will do the recovery automatically ! cant be easier than this .

Thats it .

BIG THANKS TO MongoTEL_Support , and Thank you Yealink Technical Support team.

you saved us!

Thank you for the above message, had same similar issue, I was android version of which I NEEDED TO upgrade the android version to a higher, eventually I mistakenly upgraded to MS Team.

I followed up the above process with download ROM file ( CP960-73.86.0.20 and CP960-73.80.0.25) still showing to import MS team license but in French format.
How do I go about this
10-17-2022 07:24 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  CP960 use it as a speakerphone stefanp74 0 50 Yesterday 05:39 PM
Last Post: stefanp74
  License permission is not support CP960 koudougnon 1 542 01-30-2024 03:23 AM
Last Post: complex1
  Zoom Rooms CP960 Replacement williamadams 1 603 01-25-2024 08:19 PM
Last Post: complex1
  CP960 upgrade to teams n downgrade to yealink original failed and12345 2 9,264 12-13-2023 05:48 AM
Last Post: wwhrgvit
Sad CP960 - can't refresh the code to login roberto.sabbag 0 1,276 09-13-2023 08:09 PM
Last Post: roberto.sabbag
  CP960 recovery and convert to SIP jfooterwc 0 1,048 07-25-2023 11:18 PM
Last Post: jfooterwc
  Install zoom client on CP960 gnieradka 3 2,249 05-30-2023 08:08 PM
Last Post: Yisroel_MongoTEL
  cp960 connection to vc210 adencool 0 1,020 05-18-2023 08:55 PM
Last Post: adencool
  CP960 compatible cams with MS Teams rainer.horn@kelvion.com 0 1,285 02-13-2023 10:32 PM
Last Post: rainer.horn@kelvion.com
  CP960 Volume can't be controled via PC m.krygier 1 2,108 02-03-2023 03:48 PM
Last Post: m.krygier

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication