[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Dial plan - How to include # at end of dial string
Author Message
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 837
Joined: Jan 2014
Reputation: 23
Post: #4
RE: Dial plan - How to include # at end of dial string
(12-11-2019 12:15 AM)cmadeiros@tecs.bm Wrote:  Hi - Thanks for the reply..and no problem with the English...understood you first time. I did disable Key As Send and confirmed that i can include # in the dial string. The Challenge is getting the correct sequence to dial out. For example if i program one of the buttons for BLF for extn 2233 and configure Pickup Code as *32*#. When someone calls that extension, I can see call flash/ring on the Yealink button and if i select the button to initiate the pickup code it dials out *32*# instead of *32*2233# which is required to pickup the call.

I think i am getting closer to the correct configuration.

tks

Hi,

Do you mean something like this?
   

Best regards,
Frank.

Dutch is my native language, not English. Apologies for my imperfect grammar.
12-11-2019 02:36 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Dial plan - How to include # at end of dial string - complex1 - 12-11-2019 02:36 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  speed dial to an IP address (ext@IP on value) EduardoV 3 843 11-07-2019 07:43 PM
Last Post: EduardoV
  DND Dial 2 Codes at once Blake1 0 1,013 05-29-2018 02:25 PM
Last Post: Blake1
  Yealink Dial Plan RobertCrawford 8 6,217 03-09-2018 06:38 AM
Last Post: Johnny88
  Macro String Question n00604443 1 1,852 01-24-2018 09:29 PM
Last Post: E123
  Change label string Daniel Velasco 2 2,758 03-17-2016 12:30 AM
Last Post: Daniel Velasco
  Include credentials in DSS Key URL FurnicK 3 3,554 08-26-2015 02:08 PM
Last Post: FurnicK
  SIP-T32G - Dial a number sent from a PC fails dspringer 1 3,020 08-15-2015 06:22 AM
Last Post: James_Yealink
  SIP-T32G - Dial a number sent from a PC ITS 3 6,811 02-26-2015 10:46 PM
Last Post: ModCraig
  Speed Dial behaviour and the the transfer.dsskey_deal_type parameter RobertS 2 5,211 01-27-2015 05:10 PM
Last Post: James_Yealink
  Cannot Delete from Settings>Dial Plan>Replace Rule TechPromise 3 4,446 08-27-2014 04:24 PM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication