New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
cannot upgrade or downgrade from x.83.0.55 firmware
Author Message
kenhoosen Offline
Junior Member
**

Posts: 6
Joined: Aug 2017
Reputation: 0
Post: #9
RE: cannot upgrade or downgrade from x.83.0.55 firmware
(12-02-2019 08:31 PM)bardentech Wrote:  
(12-02-2019 08:26 PM)kenhoosen Wrote:  
(12-02-2019 06:22 PM)bardentech Wrote:  
(10-23-2019 03:36 PM)kenhoosen Wrote:  We are using 3CX and have recently updated 3CX to version 16. We have several Yealink phones that are on version x.83.0.55 firmware and 3CX states that this version is unsupported. When I attempt to update the phones to a more current firmware, I get a firmware update failed message. To troubleshoot the issue, I have tried both upgrading and downgrading the firmware but, it fails every time. Phone models that we have this issue with are T41S and T21P_E2.

Anyone else have this issue (and possibly a solution)?

Thanks.

I'm having this issue right now. Did you get it resolved?

Yes. See the previous reply from mujizac.

I did see that. However, that solution didn't work for me. As it turns out, 3cx was downgrading the firmware back to 66.83.0.55 after I manually updated it to 66.84.0.35. I had to first use 3cx to upgrade the firmware, which it wouldn't do but it would provision it to receive it after the 84.0.35 upgrade was manually done.

I would try the following in order:
1) Remove the phone from the extension within 3CX (so 3CX does not try to automatically provision the phone).
2) Do a factory reset of the phone (by holding down the OK button for a few seconds, and then the display will appear warning "Reset to Factory", press OK again to confirm the reset.)
3) Manually load the 66.84.0.35 firmware.
4) Update to whatever firmware version you are trying to go to.
5) Add the phone to the extension and re-provision.
12-02-2019 09:07 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: cannot upgrade or downgrade from x.83.0.55 firmware - kenhoosen - 12-02-2019 09:07 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T48 won't upgrade lonvoice 11 1,039 12-11-2019 04:08 PM
Last Post: lonvoice
  Need to remove custom Fonality firmware 1CCT 8 3,537 09-09-2019 07:12 PM
Last Post: MongoTEL_Support
  Firmware update failed, any options? srenton 2 2,601 07-31-2019 07:21 AM
Last Post: antoineg
  Updating Firmware on T42S DBM14386 3 1,759 07-24-2019 11:09 AM
Last Post: Babylonia
  T48G S4B firmware and WF40 wifi dongle noel_leahy 8 5,681 07-23-2019 06:04 AM
Last Post: Babylonia
  T48S after Firmware update to 66.9.0.80 no Downgrade possible? thomas.hauff 1 884 07-15-2019 03:06 PM
Last Post: East_Yealink
  EHS36 Firmware via T46G - User Name Password Richard242 1 658 07-12-2019 08:36 AM
Last Post: Travis_Yealink
  BLF not working since firmware 66.82.x.x Jeremy17 1 1,051 05-30-2019 07:52 PM
Last Post: Autus Technology_Support
  Typo in Firmware 66.84.0.15 snusnu 1 769 05-24-2019 12:22 PM
Last Post: Travis_Yealink
  Current Firmware T49G? Joseph1823 0 618 03-28-2019 05:08 PM
Last Post: Joseph1823

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication