[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How can i reset my phone
Author Message

Post: #4
RE: How can i reset my phone
(10-24-2019 01:03 PM)andyjgarner Wrote:  
(10-24-2019 11:56 AM)Garry_Yealink Wrote:  
(10-21-2019 02:57 PM)andyjgarner Wrote:  Hello

I am a new user so may not use the correct terms in my post, so please forgive me.
I have purchased a second hand SIP-T23G
It has firmware version and MAC 00:15:65:E7:23:B7
During startup the display includes a screen headed "Auto Provision"

I would like to reset the phone to factory defaults and then configure it for my own use.
I do not have the credentials to log in and reset the phone (it's not admin/admin).
I also considered using recovery mode but do not know if this would achieve my aim.
(Nor do I have the .bin or .rfs files needed).

Is there anything else I can try / do to gain control of my phone please?

Many thanks, Andy.

Dear Customer,

Thanks for reaching out to Yealink technical support team. This is Garry at your service.

1. When you restart the T23G, the phone screen appears "Auto Provision". This is because the phone is tied to the RPS system..
2. You tried to use the phone's default password "admin", but failed to log in.Because the phone code has been changed.

The firmware version you are using is DT's special edition software. The admin password would be changed for security consideration when the phone was provisioned with the DT. You can contact DT and provide them with a purchase photo and a picture of the phone with the MAC address. DT will give you a solution.

Best Regards,

Thanks for the helpful reply but unfortunately i do not understand who (or what) DT is and so do not have their contact details. Are you able to let me know who DT is and how I could contact them please? Thanks, Andy.

DT is deutsche telekom. The firmware version you are using is, which makes us provide it for them. So we assume that your used phone is provided by DT.
If you can't reach DT. You can contact the phone provider and ask them to delete the phone's MAC address from the RPS system and provide you with the phone's password.
10-24-2019 02:45 PM
     Quote this message in a reply
Post Reply 

Messages In This Thread
How can i reset my phone - andyjgarner - 10-21-2019, 02:57 PM
RE: How can i reset my phone - anonymous1709185391023 - 10-24-2019, 11:56 AM
RE: How can i reset my phone - andyjgarner - 10-24-2019, 01:03 PM
RE: How can i reset my phone - anonymous1709185391023 - 10-24-2019 02:45 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  2-way paging with no indication on phone nolto 1 1,637 05-11-2023 11:20 PM
Last Post: Yisroel_MongoTEL
  T57W - Using the Phone Directory bill@wesimplifyit.com 0 1,022 04-14-2023 12:41 AM
Last Post: bill@wesimplifyit.com
  W70B - 3CX phone book is not displayed completely ChrisGER 1 4,662 03-19-2023 07:31 PM
Last Post: thomas32
Question 3CX / Yealink passthrough VLAN issue (when phone is rebooted) maindriver 4 11,448 03-24-2022 10:25 PM
Last Post: maindriver
  Limit maximum of active calls per phone elastalink 5 14,931 09-09-2021 03:52 AM
Last Post: kapetrosyan
  Read specific variable from phone configuration saivo 0 3,428 06-13-2021 05:23 PM
Last Post: saivo
  Raw XML for Remote Phone Book rgranholm 1 6,798 03-24-2020 06:14 AM
Last Post: crazyau
  Setting phone to default to No Account by default when Off Hook InterLynx 4 16,021 01-08-2020 01:20 AM
Last Post: tfrazer
  Can't register T21P E2 phone LOU 2 14,666 02-09-2019 03:48 PM
Last Post: rccloud
  Call Parking - Yealink Phone - Asterisk 11 vs 13 Velocita Technology 1 7,679 12-26-2017 06:06 AM
Last Post: Lucia_Yealink

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication