[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T48S/G dial plan
Author Message
jolouis Offline

Posts: 339
Joined: Oct 2013
Reputation: 6
Post: #9
RE: T48S/G dial plan
Just to clarify something:

"Inter digit time" as Complex1 pointed out is the raw value in seconds the phone waits between digits. So if you set it to 1, if a user is slow in dialing they may find that calls go out before they are finished.

i.e. User 1 dials:
312 (quickly) -> works fine
User 2 dials:
3..12 (slow/user pauses to remember who they are calling) -> phone tried to dial just "3" since user took too long.

A better approach is to properly utilize the dial plan feature as I mentioned in my previous post. The dial plan extends the logic of the phone as follows:
a) Every time user enters a digit, phone will check to see if the full sequence they have entered matches one of the dial plan patterns. If so, phone dials out straight away
b) IF pattern DOES NOT match dial plan entries, then phone waits "Inter Digit Time" to see if user has more digits to enter or if call should be placed.

So in a properly configured setup 95% of users should never need to hit "send" on a call, and should also never have to wait 4-5 seconds after dialing for calls to go out. Setup proper dial plan patterns and users will be much happier.
10-21-2019 01:02 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
T48S/G dial plan - sprintership - 10-16-2019, 12:54 PM
RE: T48S/G dial plan - complex1 - 10-16-2019, 02:59 PM
RE: T48S/G dial plan - sprintership - 10-16-2019, 03:06 PM
RE: T48S/G dial plan - complex1 - 10-16-2019, 03:20 PM
RE: T48S/G dial plan - sprintership - 10-16-2019, 03:25 PM
RE: T48S/G dial plan - complex1 - 10-16-2019, 05:06 PM
RE: T48S/G dial plan - jolouis - 10-16-2019, 03:02 PM
RE: T48S/G dial plan - sprintership - 10-16-2019, 05:16 PM
RE: T48S/G dial plan - jolouis - 10-21-2019 01:02 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T48S BLF Talking vs Ringing JordanHVRA 0 307 04-05-2023 01:31 PM
Last Post: JordanHVRA
  Speed Dial to a specific phone? prestigefac 0 457 02-06-2023 12:11 AM
Last Post: prestigefac
  T48S Very Slow Response nolto 1 1,738 08-11-2022 05:51 PM
Last Post: complex1
  Yealink T48S won't factory reset djcartledge 3 3,019 07-16-2022 05:16 PM
Last Post: complex1
  Yealink T48s Firmware update failed dangmoss 2 4,978 02-19-2022 03:09 AM
Last Post: dangmoss
  Problem Change Firmware T48s from SFB to SIP Lars Maschke 2 4,464 01-14-2022 10:22 AM
Last Post: kumagera
  T48s setting outbound caller ID thunderzhao 1 3,868 09-10-2021 04:08 PM
Last Post: complex1
  T48S Display Language change (Step by Step) schost 0 3,127 03-04-2021 04:02 PM
Last Post: schost
  T48s - Missed calls Bernhard77 0 2,660 01-28-2021 04:10 PM
Last Post: Bernhard77
  Creating Pause in Speed Dial on T42S tcodispot 1 3,640 12-16-2020 05:47 AM
Last Post: Yisroel_MongoTEL

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication