[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Action URI in W52P
Author Message
Garry_Yealink
Unregistered

 
Post: #2
RE: Action URI in W52P
(10-03-2019 08:48 PM)RRC_Support Wrote:  Hi Team!
Is there any possibility in W52P of external control of equipment via http requests - like this is implemented in T21 and others.

In the web interface there is no way to configure allowed addresses. Via provisioning cfg too..

Dear Customer

Good day. This is Garry from Yealink Technical Support Team. Nice to know you.

Our W52P does not support "remote control". You can configure the phone only through the W52H UI, or through the Base web side or by using Auto provision.

If you want to log into the W52P web side, you need to register W52H to Base first. Then you can press the "Paging" button on Base to display the IP address on W52H or check the IP address on the registration handle and then use the IP address to go to the Base page and configure the phone.

If you need an Auto provision configuration, you can follow T21's Auto provision deployment.

In the attachment, I have sent you the user guide and administrator guide of W52P. Meanwhile, you can enter the official website of W52P for more information through the link below.
http://support.yealink.com/documentFront...umentId=25

Any upgrade, please let me know.

Best Regards
Garry


Attached File(s)
.pdf  Yealink_W52P_User_Guide_V81_12 (1).pdf (Size: 2.64 MB / Downloads: 1)
10-22-2019 01:27 PM
     Quote this message in a reply
Post Reply 


Messages In This Thread
Action URI in W52P - RRC_Support - 10-03-2019, 08:48 PM
RE: Action URI in W52P - Garry_Yealink - 10-22-2019 01:27 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Is there no call history in web management panel in W52P? poznaniak 1 696 08-10-2020 12:49 PM
Last Post: complex1
  W52P factory reset without password ralph 1 1,634 04-02-2020 03:05 AM
Last Post: Yisroel_MongoTEL
  W52p Repair Aliaksandr 10 5,498 02-10-2020 10:30 PM
Last Post: RobertoDSM
  W52P Sporadic behavior with auto answer csmith@ccexpert.net 2 5,298 09-27-2019 08:38 PM
Last Post: justingoldberg
  W52P Dect Interface "Settings" is missing ? CHRIYEA 1 1,958 06-06-2019 08:58 AM
Last Post: complex1
  W52P - Detected as Router and Telephone SG300 LLDP jmtread 1 3,388 12-21-2018 12:27 AM
Last Post: jmtread
  W52P admin pass after recovery crodaxy 1 2,957 12-04-2018 10:16 AM
Last Post: complex1
  W52P Handset Registration Fail CSPL 2 3,772 11-28-2018 06:00 AM
Last Post: CSPL
  W52P SfB Fred_ofi 0 1,785 10-18-2018 02:07 PM
Last Post: Fred_ofi
  W52P Issue with LLDP and VLAN ID derekb 2 4,567 07-22-2018 10:00 PM
Last Post: darwin.cabiluna

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication