New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit :

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Action URI in W52P
Author Message
Garry_Yealink Offline
Junior Member

Posts: 10
Joined: Dec 2018
Reputation: 0
Post: #2
RE: Action URI in W52P
(10-03-2019 08:48 PM)RRC_Support Wrote:  Hi Team!
Is there any possibility in W52P of external control of equipment via http requests - like this is implemented in T21 and others.

In the web interface there is no way to configure allowed addresses. Via provisioning cfg too..

Dear Customer

Good day. This is Garry from Yealink Technical Support Team. Nice to know you.

Our W52P does not support "remote control". You can configure the phone only through the W52H UI, or through the Base web side or by using Auto provision.

If you want to log into the W52P web side, you need to register W52H to Base first. Then you can press the "Paging" button on Base to display the IP address on W52H or check the IP address on the registration handle and then use the IP address to go to the Base page and configure the phone.

If you need an Auto provision configuration, you can follow T21's Auto provision deployment.

In the attachment, I have sent you the user guide and administrator guide of W52P. Meanwhile, you can enter the official website of W52P for more information through the link below.

Any upgrade, please let me know.

Best Regards

Attached File(s)
.pdf  Yealink_W52P_User_Guide_V81_12 (1).pdf (Size: 2.64 MB / Downloads: 1)
10-22-2019 01:27 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
Action URI in W52P - RRC_Support - 10-03-2019, 08:48 PM
RE: Action URI in W52P - Garry_Yealink - 10-22-2019 01:27 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  W52p Repair Aliaksandr 10 1,247 02-10-2020 10:30 PM
Last Post: RobertoDSM
  W52P Sporadic behavior with auto answer 2 3,938 09-27-2019 08:38 PM
Last Post: justingoldberg
  W52P Dect Interface "Settings" is missing ? CHRIYEA 1 846 06-06-2019 08:58 AM
Last Post: complex1
  W52P - Detected as Router and Telephone SG300 LLDP jmtread 1 2,384 12-21-2018 12:27 AM
Last Post: jmtread
  W52P admin pass after recovery crodaxy 1 1,668 12-04-2018 10:16 AM
Last Post: complex1
  W52P Handset Registration Fail CSPL 2 2,296 11-28-2018 06:00 AM
Last Post: CSPL
  W52P SfB Fred_ofi 0 1,035 10-18-2018 02:07 PM
Last Post: Fred_ofi
  W52P Issue with LLDP and VLAN ID derekb 2 3,643 07-22-2018 10:00 PM
Last Post: darwin.cabiluna
  W52P handset won't set up kennyb7 0 1,400 06-18-2018 01:01 AM
Last Post: kennyb7
  Configuration Yealink W52P for a GSM Gateway. Yea 2 2,144 05-31-2018 02:45 PM
Last Post: Yea

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication