[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
3CX + W60B + W56H
Author Message
Babylonia Offline
Junior Member
**

Posts: 39
Joined: Jun 2019
Reputation: 0
Post: #4
RE: 3CX + W60B + W56H
I did some testing here.
In my situation I do use desk phones T41S as a stand alone telephone, with its own “local” SIP-accounts (internal used number).

Also using the W60B DECT base station with in my case at this moment just two hand sets.
The base station do have its own own “local” SIP-account (internal used number),
in the same way as the desk phones T41S.

But as for the desk phones T41S a SIP account is only used for one phone, the SIP account for a W60B DECT base station is used for all individual hand sets.

So redirect a call form one hand set, to another hand set is done by another way, than redirection of a call to a stand alone desk phone.

Redirection from a call from one hand set to another hand set,
I got the same experience as you, that the “ended” call of the first hand set is not ringing, by coming in other calls as long as the conversation is active to the other hand set.

But in the case when I make a redirection from a W56H hand set tot a desk phone T41S, new calls, are coming in to all W56H hand sets, as well as an “interruption” call to the T41S phone that has taken over the redirection call more early.

Also when I make a redirection from a desk phone T41S to the W60B DECT base station, and one of the hand sets is taking over the call (and ending up the call by the T41S).
New calls are coming in to all phones and W56H hand sets.
The one hand set that is still active and took the redirected call more early, also do get an an “interruption” ring, as a new call is coming in.
10-03-2019 01:51 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
3CX + W60B + W56H - Garrett78 - 09-26-2019, 10:18 AM
RE: 3CX + W60B + W56H - Babylonia - 09-29-2019, 02:07 AM
RE: 3CX + W60B + W56H - Garrett78 - 09-29-2019, 02:13 PM
RE: 3CX + W60B + W56H - Babylonia - 10-03-2019 01:51 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  W60B base With 56H ( incomming calls, no ringing when charging ) stéphane 3 5,144 Today 03:15 AM
Last Post: therring
  W60B remove intercom when transfert MYCOMPUTING 0 100 11-24-2022 10:43 PM
Last Post: MYCOMPUTING
  W56H handset no tones or ring swdatanet 2 1,067 10-26-2022 10:17 AM
Last Post: irishstovall
  W60B emitting high-pitched noise msncookie 6 6,314 09-19-2022 08:39 PM
Last Post: RobFromSouthJersey
  ‘New’ W56/W60B default admin password not recognised? Russ1 2 967 08-07-2022 02:44 PM
Last Post: Russ1
  All handsets on the same W60B loose registration after many attempts to register Alvaro Gutierrez 1 4,070 06-23-2022 09:56 PM
Last Post: rdurham
  W60B and W56H - can you PIN lock the phones,.. ? Haniel 2 6,087 06-18-2022 01:29 AM
Last Post: Beachnuttz
  Connecting WH66 to W60B aaronl 1 2,727 06-09-2022 10:00 PM
Last Post: markvdheijden
  W56H dB Levels Ryan587 2 4,494 05-14-2022 01:10 PM
Last Post: Simon from Sydney
  increase volume on earpiece on W56H handset? Simon from Sydney 0 928 05-14-2022 01:08 PM
Last Post: Simon from Sydney

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication