Clan_Yealink
Junior Member
Posts: 6
Joined: Mar 2019
|
RE: Yealink Phone to Send Private IP Address on Register
(09-17-2019 01:23 AM)Ari Wrote: A really helpful feature of the < 83 firmware was to send the private IP address of the phone on register. This is helpful for locating and administering a phone in a network.
Code:
2019/09/17 10:53:05.975177 PUBLIC_IP:12326 -> PBX_IP:5060 │2019/09/17 10:53:18.681875 PUBLIC_IP:12282 -> PBX_IP:7331
│
REGISTER sip:sub.dom.tld:5060 SIP/2.0 │REGISTER sip:sub.dom.tld:7331 SIP/2.0
Via: SIP/2.0/TCP PUBLIC_IP:12326;branch=z9hG4bK3539585581;rport │Via: SIP/2.0/TCP 10.0.0.12:5060;branch=z9hG4bK4046200025;rport
From: "234" <sip:234@sub.dom.tld:5060>;tag=4231823471 │From: "623" <sip:623@sub.dom.tld:7331>;tag=1609913972
To: "234" <sip:234@sub.dom.tld:5060> │To: "623" <sip:623@sub.dom.tld:7331>
Call-ID: 0_2813005062 │Call-ID: 3_3967202445@10.0.0.12
CSeq: 1 REGISTER │CSeq: 47362 REGISTER
Contact: <sip:234@PUBLIC_IP:12326;transport=TCP> │Contact: <sip:623@10.0.0.12:5060;transport=TCP>
Allow: INVITE, INFO, PRACK, ACK, BYE, CANCEL, OPTIONS, NOTIFY, REGISTER, SUBSCRIBE, REFER, PU│Authorization: Digest username="623", realm="sub.dom.tld", nonce="e4002605-e9a1-
LISH, UPDATE, MESSAGE │841-aff7-8ffb480434fe", uri="sip:sub.dom.tld:7331", response="81a2b738efbe4eb374
Max-Forwards: 70 │5f481d00fe0e0", algorithm=MD5, cnonce="0a4f113b", qop=auth, nc=00047361
User-Agent: Yealink SIP-T46S 66.84.0.15 │Allow: INVITE, INFO, PRACK, ACK, BYE, CANCEL, OPTIONS, NOTIFY, REGISTER, SUBSCRIBE, REFER, PU
Expires: 600 │LISH, UPDATE, MESSAGE
Allow-Events: talk,hold,conference,refer,check-sync │Max-Forwards: 70
Content-Length: 0 │User-Agent: Yealink SIP-T52S 70.81.0.10
│Expires: 60
│Allow-Events: talk,hold,conference,refer,check-sync
│Content-Length: 0
On the right is a registration from a Yealink phone on 81 firmware and in the "Call-ID" header you can see the private IP address sent. On the left, you can see the 84 firmware does not send the private IP address.
Is there a config on the Yealink to change that?
Hi Sir, how are you today?
This is Clan from Yealink Technical Support team, nice to work with you.
There are configuration statements in the phone to control whether the IP address is in the Call-ID.
Statement: account.x.call_id_no_ip_addr.enable = 0 (X is the account number)
Any queries, please feel free to let me know. Thanks.
Best Regards!
Clan
|
|