[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 1 Votes - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Blind transfer not working on hangup bug
Author Message
anonymous1659516244040
Unregistered

 
Post: #2
RE: Blind transfer not working on hangup bug
(08-20-2019 06:45 PM)mrabbitt@clarkecounty.gov Wrote:  On my T52S phones running 84.0.10, I've noticed a bug where if I hang up the handset at a specific time to complete a blind transfer, the phone instead behaves like it's in an attended transfer. This causes another major issue which I'll get to after explaining the first one.

Here are some relevant config changes present on my phones:
Semi-attended transfer is disabled
Time Out for Dial Now Rule is set to 1

Reproducing the bug:
1. Answer a call taking the handset off hook
2. Press "Transfer" button and enter extension you want to transfer to
3. Hang up the handset after the Dial Now Rule timeout but before the transfer-to extension starts ringing

What you would expect to happen here is to have the call blind transfer. Instead, what happens is the phone goes into some kind of invalid attended transfer state where if you hang up the Yealink phone, the extension you transferred to will continue to ring. Once that call gets picked up or goes to voicemail, you will hear the audio play on the Yealink phone even though it is on the home screen and no longer in a call.

If you do the transfer and hang up before the Dial Now Rule timeout finishes or after the transfer-to extension starts ringing, the call blind transfers correctly.



Dear Customer ,

Good day ,this is Phil from Yealink Technical Support Team ,nice to meet you .

Please first to upgrade the version of T52S to newest version ,you can get newest firmware version from following address:

http://support.yealink.com/documentFront...mentId=185

Try to reproduce the issue and see if it is still exits .

If yes ,

(1)Please help to duplicate the issue and show us a video so that we can have a better understanding of problem scenarios .

(2)Please provide the diagnostic files including A/B/C (A calls B ,B answer the call ,A and B establish the call ,B bind transfer A to C)for further analysis ,thanks in advance .

Here is a FAQ about how to get files :http://support.yealink.com/faq/faqInfo?id=707

Best Regards,

Phil
12-04-2019 04:33 PM
     Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Blind transfer not working on hangup bug - anonymous1659516244040 - 12-04-2019 04:33 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Multicast Stops Working until Phone Rebooted Blake1 7 1,172 08-05-2022 09:11 PM
Last Post: Chris708
  MP50 - Teams Button not working SP3C5 3 3,242 05-10-2022 07:17 PM
Last Post: SP3C5
  Screen Saver Stops Working awilson@intermaxteam.com 3 2,037 02-13-2022 05:09 AM
Last Post: complex1
Bug T21P_E2 Google Contacts Sync not working anymore paolo.cresti 2 1,726 01-28-2022 11:43 PM
Last Post: paolo.cresti
  Yealink WH62 UC not working with Cisco Webex oliragg 0 2,507 05-10-2021 05:18 PM
Last Post: oliragg
  Jabra microphone not working with EHS40 Adapter chair 2 5,798 12-16-2020 05:11 AM
Last Post: Alex001
  Transfer to Remote Phonebook Minerva 5 14,653 10-22-2020 03:11 PM
Last Post: joe.carroll@managedinstalls.com
  V85 VPN no longer working avayax 1 4,224 07-22-2020 11:29 AM
Last Post: gerdesj
  Phones Web UI Not Working after Firmware Update Rockses 2 7,232 05-26-2020 02:44 PM
Last Post: Lewis-H
  DSS for transfer direct to voicemail lulu92 1 3,685 09-04-2019 08:42 PM
Last Post: lulu92

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication