New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Blind transfer not working on hangup bug
Author Message
mrabbitt@clarkecounty.gov Offline
Junior Member
**

Posts: 1
Joined: Mar 2019
Reputation: 0
Post: #1
Blind transfer not working on hangup bug
On my T52S phones running 84.0.10, I've noticed a bug where if I hang up the handset at a specific time to complete a blind transfer, the phone instead behaves like it's in an attended transfer. This causes another major issue which I'll get to after explaining the first one.

Here are some relevant config changes present on my phones:
Semi-attended transfer is disabled
Time Out for Dial Now Rule is set to 1

Reproducing the bug:
1. Answer a call taking the handset off hook
2. Press "Transfer" button and enter extension you want to transfer to
3. Hang up the handset after the Dial Now Rule timeout but before the transfer-to extension starts ringing

What you would expect to happen here is to have the call blind transfer. Instead, what happens is the phone goes into some kind of invalid attended transfer state where if you hang up the Yealink phone, the extension you transferred to will continue to ring. Once that call gets picked up or goes to voicemail, you will hear the audio play on the Yealink phone even though it is on the home screen and no longer in a call.

If you do the transfer and hang up before the Dial Now Rule timeout finishes or after the transfer-to extension starts ringing, the call blind transfers correctly.
(This post was last modified: 08-20-2019 06:53 PM by mrabbitt@clarkecounty.gov.)
08-20-2019 06:45 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Blind transfer not working on hangup bug - mrabbitt@clarkecounty.gov - 08-20-2019 06:45 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  DSS for transfer direct to voicemail lulu92 1 101 09-04-2019 08:42 PM
Last Post: lulu92
Exclamation Call log on after Att transfer VP-T49G Roksvel 4 593 06-18-2019 09:35 AM
Last Post: Roksvel
  T41S admin login not working ayfrolov82 1 509 05-20-2019 12:34 PM
Last Post: Simons_Yealink
  Phones Web UI Not Working after Firmware Update Rockses 0 409 04-09-2019 01:24 PM
Last Post: Rockses
  Admin log in not working Vortex 5 3,410 03-17-2019 04:01 PM
Last Post: complex1
  BUG - inbound hold/unhold/hangup not work via remote control for some accounts nSolvePaul 2 1,037 11-02-2018 03:10 PM
Last Post: nSolvePaul
  Transfer with T2XG and call back hercross 7 1,810 09-27-2018 09:21 PM
Last Post: jolouis
  Transfer calls T26P agalindo 2 1,024 09-17-2018 09:10 AM
Last Post: agalindo
  Dial Now Rule Issue when Transfer IPBX 3 2,076 03-19-2018 04:26 PM
Last Post: IPBX
  LAn/Bridge not working DeepB 13 11,459 03-14-2018 02:29 PM
Last Post: JOHN124

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication