[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
CP930 Randomly mutes
Author Message
mwaechter Offline
Junior Member
**

Posts: 2
Joined: Jun 2017
Reputation: 0
Post: #1
CP930 Randomly mutes
We have a customer we just put in 1- CP960 and 4- CP930's connected to 3CX version 16. One of the 930's is randomly muting anywhere from 20-30 minutes into the call; all mute lights turn red. I verified it has the latest firmware and rebooted the phone. Has anybody else experienced this?
08-16-2019 01:02 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Snow Offline
Junior Member
**

Posts: 1
Joined: Sep 2017
Reputation: 0
Post: #2
RE: CP930 Randomly mutes
Did not experience this issue myself however we have deployed couple 930W and customer has reported calls going silent after about 30 minutes. I wonder if that is related to the issue you have described. I will try to replicate this issue.

Do you have any issues with the latency on those 930's? I am testing with 3CX *777 echo test and i've got about 0.5 second voice delay comparing to 0.1 second delay on the normal handsets...
10-28-2019 04:46 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
strulock Offline
Junior Member
**

Posts: 3
Joined: Feb 2019
Reputation: 0
Post: #3
RE: CP930 Randomly mutes
I'm currently having this issue with a CP-930. Any resolution here?
02-17-2020 04:57 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
mark@valley-tel.com Offline
Junior Member
**

Posts: 1
Joined: May 2020
Reputation: 0
Post: #4
RE: CP930 Randomly mutes
Any update on why this might be happening? I have the same issue with a newly installed device. The firmware is up to date.
05-05-2020 06:19 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
strulock Offline
Junior Member
**

Posts: 3
Joined: Feb 2019
Reputation: 0
Post: #5
RE: CP930 Randomly mutes
Mark,

We have not been able to reliably replicate the issue. It has occurred randomly. Hoping to catch it next time I have wireshark running. I have a case open with tech support to address.

Thanks,
Scott

(05-05-2020 06:19 PM)mark@valley-tel.com Wrote:  Any update on why this might be happening? I have the same issue with a newly installed device. The firmware is up to date.
05-05-2020 07:14 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 43
Post: #6
RE: CP930 Randomly mutes
(05-05-2020 07:14 PM)strulock Wrote:  Mark,

We have not been able to reliably replicate the issue. It has occurred randomly. Hoping to catch it next time I have wireshark running. I have a case open with tech support to address.

Thanks,
Scott

(05-05-2020 06:19 PM)mark@valley-tel.com Wrote:  Any update on why this might be happening? I have the same issue with a newly installed device. The firmware is up to date.

Hi,

Did you ever checked the power source?
If you use PoE, then replace it for a standalone power supply.

Hope this will help.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
05-05-2020 07:49 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
strulock Offline
Junior Member
**

Posts: 3
Joined: Feb 2019
Reputation: 0
Post: #7
RE: CP930 Randomly mutes
(05-05-2020 07:49 PM)complex1 Wrote:  Hi,

Did you ever checked the power source?
If you use PoE, then replace it for a standalone power supply.

Hope this will help.

Thanks for the note - are you referring to the W60B base? To be clear, we should use a standalone power supply instead of PoE for the W60B base?
05-05-2020 07:56 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
complex1 Offline
3CX Adv. Cert. Engineer
*****

Posts: 1,509
Joined: Jan 2014
Reputation: 43
Post: #8
RE: CP930 Randomly mutes
(05-05-2020 07:56 PM)strulock Wrote:  Thanks for the note - are you referring to the W60B base? To be clear, we should use a standalone power supply instead of PoE for the W60B base?

Hi,

Yes, I am referring to the W60B Base.
My experience is when there are randomly and intermittent issues, 9 of the 10 times the power supply causes this. That's why I suggested a standalone power supply... to test.

Kind regards,
Frank.

I am not an employee of Yealink.
Dutch is my native language, not English. Apologies for my imperfect grammar.
Please do not send unsolicited PM messages. I will not answer them.
05-06-2020 10:12 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
gazzam86 Offline
Junior Member
**

Posts: 1
Joined: Jul 2020
Reputation: 0
Post: #9
RE: CP930 Randomly mutes
Having similar issues. Mic drops out randomly via pc speakerphone. have to reboot the device to fix.
07-16-2020 12:52 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
kzllp Offline
Junior Member
**

Posts: 2
Joined: Oct 2020
Reputation: 0
Post: #10
RE: CP930 Randomly mutes
We have the same issues with our CP930W -- any fix?
10-07-2020 07:02 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication