New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Disable line x while phone is set to DND
Author Message
jolouis Offline
Moderator
*****

Posts: 305
Joined: Oct 2013
Reputation: 5
Post: #4
RE: Disable line x while phone is set to DND
(08-07-2019 09:16 AM)IT-Risch_Support Wrote:  The phone still shows "online" in our broadsoft admin console. It there any way to disable line when the phone is set to DND?

Short answer is no, DND does not function that way. If you are determined to share a single SIP account between two devices, try taking a look at the hot desking feature in the admin guide.

Using hotdesking, you can log into a phone with your SIP account details directly on the phone. When you're done, you press logout, and the phone logs out and goes back to login prompt. On the other phone, you can then log in again using the same credentials.

It's a bit annoying because it means you need to type in the account password each time, but if that's not too difficult then that is the easiest way to achieve your goal.

Alternatively you could automate it with some kind of pushXML/configuration updates triggered by a programmed XML browswer key, but that's much more complicated to setup and requires you to understand what you're doing and have a scriptable server on hand to make it happen.
08-07-2019 02:00 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: Disable line x while phone is set to DND - jolouis - 08-07-2019 02:00 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Remote Phonebook - Numbers Display Format On Phone Medryn 18 29,836 10-10-2019 11:03 PM
Last Post: flyingchipmunk
  Slow response when user presses buttons means phone number enters incorrectly chris.stewart 1 127 09-26-2019 06:58 AM
Last Post: Jacqueline250
  Yealink Phone to Send Private IP Address on Register Ari 2 179 09-22-2019 11:00 PM
Last Post: Ari
  COM-DEX compatible Bluetooth phone fizzypop 1 155 08-28-2019 02:39 PM
Last Post: jolouis
  COM-DEX compatible Bluetooth phone fizzypop 0 93 08-28-2019 02:31 PM
Last Post: fizzypop
  T42G latest fw phone web interface invalid password clevoip 2 1,156 06-03-2019 03:03 PM
Last Post: Dario
  Network Conference on Shared Line JasonTricom 0 294 04-16-2019 09:06 PM
Last Post: JasonTricom
  T42S phone not allowing to change default admin password? SysAdmin-Edgar 1 641 03-15-2019 01:46 PM
Last Post: complex1
  Different users on the same phone on SIP-T27G econnet 2 988 01-02-2019 01:46 PM
Last Post: jolouis
  CDP enable after factory reset cause the phone can't obtain IP address ccy 4 1,248 11-30-2018 02:34 PM
Last Post: jolouis

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication