New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[SOLVED] OpenVPN not doing anything T42G V83
Author Message
Danariel Offline
Junior Member
**

Posts: 3
Joined: Jul 2019
Reputation: 0
Post: #3
RE: OpenVPN not doing anything T42G
Thanks for the answer jolouis
the logs boot and sys at level 6 are showing:
Code:
<134>Aug  2 00:00:09 sys [939]: SYS <6+info  > run openvpn
<132>Aug  2 00:00:09 ATP [997]: ATP <4+warnin> Network check fail, sleep 1s
<134>Aug  2 00:00:09 sys [939]: LLDP<6+info  > proto LLDP, multicast filter for <add> success.
<134>Aug  2 00:00:09 sys [939]: LLDP<6+info  > proto CDPv2, multicast filter for <add> success.
<134>Aug  2 00:00:09 sua [1014]: APP <6+info  > [SIP] <IPC_rcv >:msg:0x00000004, wparam:0x00000001, lparam:0xc4097a18, id:Undefined recv msg string
<134>Aug  2 00:00:09 sua [1014]: APP <6+info  > [SIP] <IPC_rcv >:msg:0x00000084, wparam:0x00000013, lparam:0x00000000, id:Undefined recv msg string
<133>Aug  2 00:00:09 ipvp[1008]: IPVP<5+notice> 009.746.986:Message=0x00000004(0x00000001+0xc4097a18+0)
<133>Aug  2 00:00:09 ipvp[1008]: IPVP<5+notice> 009.936.253:Message=0x00000084(0x00000013+0x00000000+0)
<29>Aug  2 00:00:09 openvpn[1118]: OpenVPN 2.4.2 arm-unknown-linux-gnu [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] built on Oct 20 2017
<134>Aug  2 00:00:09 sua [1014]: APP <6+info  > [SIP] <IPC_rcv >:msg:0x00000004, wparam:0x00000000, lparam:0xc4097a18, id:Undefined recv msg string
<134>Aug  2 00:00:09 sua [1014]: APP <6+info  > [SIP] <IPC_rcv >:msg:0x00000085, wparam:0x00000013, lparam:0x00000000, id:Undefined recv msg string
<133>Aug  2 00:00:09 ipvp[1008]: IPVP<5+notice> 009.964.082:Message=0x00000004(0x00000000+0xc4097a18+0)
<133>Aug  2 00:00:09 ipvp[1008]: IPVP<5+notice> 009.964.777:Message=0x00000085(0x00000013+0x00000000+0)
<134>Aug  2 00:00:09 sys [939]: SRV <6+info  > arm_set_lan_port
<134>Aug  2 00:00:09 sys [939]: SYS <6+info  > close pc port
<134>Aug  2 00:00:09 sys [939]: SRV <6+info  > arm_set_port_speed
<134>Aug  2 00:00:09 sys [939]: SRV <6+info  > lan_link_mode 0
<131>Aug  2 00:00:09 sys [939]: SRV <3+error > set net 1 interface, bsp speed 100, level 4: bsw level success.
<132>Aug  2 00:00:09 sys [939]: SYS <4+warnin> set lan speed 100, level 4
<131>Aug  2 00:00:09 sys [939]: SRV <3+error > Command Failed, EMAC_SIOCG_SPEED

Other than that there is no mention of the certificate files, the ip of the VPN server or any info that I can link with an attempt to connect to the VPN

I've re-created all the certificates (the server's and phone's) and created a new conf file with the same content but using the port 1195 instead
The server is waiting incoming connections. Just showing the message "Initialization Sequence Complete". I've checked all the process to start the server an no error is visible. Then I tried to connect with the same certificates but from a laptop and the server receives the connection and assigns the tunnel and IP.
Both the laptop and the phone are in the same network and using the same public IP and router to go out to internet, so it's not a problem of firewall block or blocked IP from the other end.

Any other suggestion?
Downgrade the firmware and check if the V82 or V81 versions are working?

Thanks in advance

EDIT: I tested to edit the routes in the vpn.cnf file to see if there was any error message as "file not found" or something, but it's accepting all the routes:
- /yealink/config/openvpn/keys
- /config/openvpn/keys
- /openvpn/keys
- /keys

The error message about CA or crt file missing is only if there is no entry in the vpn.cnf and not a file checking?
In that way, if the file is not present you don't receive an error message?

I've also changed the name of the ca file to ca1 and there is no error message
(This post was last modified: 08-02-2019 02:11 PM by Danariel.)
08-02-2019 08:57 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: OpenVPN not doing anything T42G - Danariel - 08-02-2019 08:57 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Move from SfB to Teams with T42G helios.comms 0 262 05-21-2019 07:51 PM
Last Post: helios.comms
  OpenVPN not working on T46S 66.83.0.35 _DJ 3 1,168 05-11-2019 07:54 AM
Last Post: complex1
  What cipher will T46G support in OpenVPN AndyInNJ 1 559 02-07-2019 01:32 PM
Last Post: jolouis
  Echo when using headset on T46S and T42G IZT-crobinson 0 533 11-27-2018 02:25 AM
Last Post: IZT-crobinson
  T42G recovery files needed Global Data Systems 0 637 11-12-2018 09:15 PM
Last Post: Global Data Systems
  OpenVPN tunnel disconnects frequently Ozy 2 832 11-01-2018 08:09 PM
Last Post: dannylarsen
  Solved - T46G - Firmware issues - 28.83.0.50 B-C 1 1,216 10-13-2018 09:33 AM
Last Post: complex1
  T42G - Impossible to upgrade firmware psanmartin 5 1,981 08-22-2018 01:24 PM
Last Post: psanmartin
  SHA256 for OpenVPN maibua 0 580 07-23-2018 08:11 AM
Last Post: maibua
  T48G Webrequest Time Outs? Solved Attila 0 719 07-07-2018 06:41 AM
Last Post: Attila

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication