New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T21P E2 attended transfer caller id name in history
Author Message
Clan_Yealink Offline
Junior Member
**

Posts: 3
Joined: Mar 2019
Reputation: 0
Post: #2
RE: T21P E2 attended transfer caller id name in history
(06-06-2019 10:45 AM)gralech Wrote:  Hi everyone!

I'm writing provision configs for our office telephones Yealink T21P E2
Everything working fine, except one thing:

After attended call transfer
A(calling, ex 7778899) -> B(secretary) -> C
on phone C caller id printed as "Secretary 7778899"

After call end on telephone C i go in History, and see: Secretary (w/o number)
if i go to history details for this call, i see number: 7778899

How should i change my config files, so after attended transfer on telephone C will be only number 7778899 (w/o "secretary"), and in history there will be only number 7778899 ?

Somehow i did this once, and now i can't find correct set of config parameters...

my config (selected parts):
y000000000052.cfg
features.save_init_num_to_history.enable = 0

<mac>.cfg
account.1.refresh_remote_id.enable = 1
account.1.cid_source = 4
account.1.cp_source = 0
account.1.transfer_refer_to_contact_header.enable = 1


Any advice?
Dear Customer,

This is Clan from Yealink Technical Support team, nice to work with you.

Through your description, I have known about your problem and tested it locally.
I configure the following parameters in the MAC.CFG file:
account.1.refresh_remote_id.enable = 1
features.save_init_num_to_history.enable = 0
account.1.cid_source = 0 (It configures the identity of the caller. )
account.1.cp_source = 0
account.1.transfer_refer_to_contact_header.enable = 1

You can try again with my configuration. If there are any questions, please provide the capture files of user B and user C. I need to know from which field is the caller ID that user C got.
Please send the level 6 system log, config.bin file and PCAP traces to me.
About how to get these files, please refer to this FAQ:
http://support.yealink.com/faq/faqInfo?id=707

Looking forward to your reply.

Best Regards!
Clan
(This post was last modified: 07-12-2019 09:46 AM by Clan_Yealink.)
07-12-2019 09:43 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: T21P E2 attended transfer caller id name in history - Clan_Yealink - 07-12-2019 09:43 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Can't Call Forward Yealink T21P e2 - latest firmware Grace6641 1 283 06-18-2019 09:53 AM
Last Post: Walter_Yealink
  Questions about autoprovisioning for T21P E2 Mauro 4 2,249 03-19-2018 01:50 PM
Last Post: Mauro
  T21P E2 and T27P Issues with voice.tone.country Spadhausen 0 1,024 10-03-2017 03:54 PM
Last Post: Spadhausen
  FreePBX EndPoint Manager Provisioning - Yealink T21P-E2 vianneyjs 2 4,737 10-19-2016 09:39 AM
Last Post: Karl_Yealink
  Wrong time with dhcp_time and DST auto - T21P E2 deactavo 1 3,206 10-01-2016 12:20 AM
Last Post: Kevin_Yealink
  Problem with registering T21P E2 with autoprovision Dimitry 2 4,237 09-19-2016 08:31 PM
Last Post: Dimitry
  3CX Phonebook: Selection of inbound caller names mahe23 2 3,905 01-29-2015 07:53 PM
Last Post: mahe23
  T21P - loading <MAC>.cfg fails filipedilopes 3 5,660 06-24-2014 08:25 PM
Last Post: Yealink Support
  Auto Provisioning and Chunked transfer encoding bearded 10 16,839 05-07-2014 06:59 PM
Last Post: amvalente
  Blind / Attended Transfer via dss key Mattrix 6 7,290 03-27-2014 07:42 PM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication