T58A red light flashing

[complex1]

(06-22-2019 11:51 AM)DS25 Wrote:  Hello complex1,

thank you. This helped partly.
I have put these values into the T58 template file "common.cfg" and autoprovisioned it over FTP with a boot file.

Now the LED is not flashing anymore, but it is permanently on as soon as the screensaver gets dark. May I have made a mistake? Or are there other numeric values to either
a) turn the LED completely off
or b) let it flash more seldom, so with longer intervals between flashes?

Thank you in advance.

Strange, these settings should work. I use them too.

As you can read in the Admin Guide:

Code:

features.power_saving.power_led_flash.on_time
If it is set to 0 and “features.power_saving.power_led_flash.off_time” is not set to 0, the power LED indicator will be off when the phone enters the power-saving mode.
(Default: 500)

features.power_saving.power_led_flash.off_time
If it is set to 0, the power LED indicator will be on when the phone enters the power-saving mode.
(Default: 3000)

Please re-check your settings.