New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Account Changes/Enable Delay
Author Message
jolouis Offline
Moderator
*****

Posts: 300
Joined: Oct 2013
Reputation: 5
Post: #2
RE: Account Changes/Enable Delay
Not sure about your point #2 with the DSS keys but generally Yealink tries to do provisioning "in the background". So normally the phone will boot, show the already configured setup on the display, and then a few seconds later after it has sent out provisioning requests and received updated config, it will do the merge and apply the updated settings.

Typically from time of the display showing the "normal idle" state to the updated one I expect it to be around 10-20 seconds, but that's using an unencrypted provisioning file being served by a local device rather than something "out in the cloud". You might be encountering additional delays due to provisioning file generation, network latency, etc.

Easiest way to tell for sure is to turn the syslog up to level 6, then reboot and let the phone do it's provisioning/updates. When you look at the syslog entries, you'll see lines for either ATP or AUTOP (depending on what Firmware version you're running). They are all timestamped, so you should be able to follow through the process and see if there are any excessive delays anywhere.

For reference, if your goal is simply to enable/disable Account 2 it may be faster to provision all of the account details at the same time your provision account 1, but just leave it disabled. Then, when you want to actually activate it, provision just the "account.2.enabled" as the only difference. I have not dealt with this in a while, but a few versions back that used to be the more efficient way of doing it.
04-18-2019 06:22 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Account Changes/Enable Delay - Chris708 - 04-16-2019, 03:37 PM
RE: Account Changes/Enable Delay - jolouis - 04-18-2019 06:22 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Two account on Yealink T46S f.barbier 1 370 06-10-2019 02:07 PM
Last Post: jolouis
  T46S Ringtone for each account GP 7 1,382 02-09-2019 08:34 AM
Last Post: complex1
  Mobile Phone Account ProCRM IT-Systems GmbH 1 889 09-28-2018 02:45 AM
Last Post: Paul_Yealink
  User Account locked - Re-enter password for Exchange services Matthias. 1 1,224 02-07-2018 05:38 AM
Last Post: Lucia_Yealink
  1 sec delay when answering using EHS mikes 1 1,464 11-28-2017 09:20 AM
Last Post: Kevin_Yealink
  Shocking delay, jitter buffer does nothing, Yealink won't fix Nitram 3 5,113 11-09-2017 11:55 PM
Last Post: Nitram
  Enable BLF Audio Notification on a specific BLF only ipcsolutions 0 1,058 11-03-2017 09:34 PM
Last Post: ipcsolutions
  features.off_hook_answer.enable not working as expected ipcsolutions 3 1,882 09-27-2017 03:03 AM
Last Post: Lucia_Yealink
  Voice delay on call pickup S J 2 2,369 05-08-2017 08:43 AM
Last Post: Kevin_Yealink
  Delay ringtone Rune 1 1,537 03-13-2017 07:51 AM
Last Post: Lucia_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication