[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Account Changes/Enable Delay
Author Message
Chris708 Offline

Posts: 80
Joined: Mar 2015
Reputation: 1
Post: #1
Account Changes/Enable Delay
I am using a Yealink T46S phone for testing and the phone is on firmware: The configurations are coming from a cloud based Asterisk server.

I am programming a second account via config file using Auto Provisioning and noticed odd behavior when the phone changes from Account 1 enabled to also having Account 2 enabled.
I am testing the settings by rebooting the phone to have it pull new configurations via Auto Provisioning.

Account 1 is extension 5000. The configuration file adds settings for Account.2 with extension 5200 and enables Account 2. However, there are a few items that I find odd.
1. No light flashes when the phone is in the process of updating with the Account.2 information and the change takes about a minute.
2. During the Account.2 update, all the DSS keys (on multiple pages) show extension 5000 for about a minute before the phone finally shows the single Account.2/line for Ext 5200.

Here are the settings I have in the config file for the second account. I have replaced specific information with generic/fake information for security.

Quote:account.2.enable = 1
account.2.label = 5200
account.2.display_name = 5200
account.2.user_name = sip5200_test
account.2.auth_name = sip5200_test
account.2.password = 0244889336533
### account.2.outbound_proxy_enable = 0
### account.2.outbound_host =
account.2.sip_server.1.address = my.voipregistration.com
account.2.sip_server.1.retry_counts = 5
account.2.sip_server.1.expires = 300
account.2.blf.subscribe_period = 3600
account.2.outbound_port = 0
account.2.sip_server.1.port = 5060
account.2.number_of_linekey = 1
account.2.sip_server.1.port = 0
account.2.outbound_proxy_enable = 0
account.2.codec.pcmu.priority = 1
account.2.codec.pcma.enable = 0
account.2.codec.g729.priority = 3
account.2.codec.g722.priority = 2

The second account does eventually get enabled/created, it is just the behavior I mentioned in 1 and 2 seems out of the ordinary.

Is there something I may be doing wrong here or is this just how Auto Provisioning works when adding an account via config file.

If I log in to the phone and Enable an account, it doesn't exhibit this behavior in items 1 and 2 above. Instead, the account registers immediately and another line button quickly appears after the last button.
04-16-2019 03:37 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
Account Changes/Enable Delay - Chris708 - 04-16-2019 03:37 PM
RE: Account Changes/Enable Delay - jolouis - 04-18-2019, 06:22 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  not able to get sip and account related details using action uri rajat_asthana 0 832 12-26-2023 03:51 PM
Last Post: rajat_asthana
  Key pad speed dial FAILS from non-default account jseeley 1 1,351 09-08-2023 05:56 AM
Last Post: jseeley
  Model T42s and T42g, the speakerphone is enable on incoming calls Lissvazquez 6 3,783 07-28-2023 10:27 PM
Last Post: complex1
  Send different codes on keystroke (enable and disable) Marsl84 0 1,153 04-21-2023 08:15 PM
Last Post: Marsl84
Question I am unable to register a new account under Account -> Register. Chris_Gc 5 5,462 02-09-2023 08:36 PM
Last Post: complex1
  Hotdesking extra account issue gareth20202 0 1,631 08-05-2022 08:06 PM
Last Post: gareth20202
  SIP account on the Yealink T46U suddenly Not Registered kmsfn 0 3,604 10-26-2021 04:44 PM
Last Post: kmsfn
Question Switch account on T48S - Outgoing caller ID remains at default account puregin 0 4,074 09-30-2020 09:52 AM
Last Post: puregin
  Two account on Yealink T46S f.barbier 1 6,396 06-10-2019 02:07 PM
Last Post: jolouis
  T46S Ringtone for each account GP 7 14,394 02-09-2019 08:34 AM
Last Post: complex1

Forum Jump:

User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication