New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
DTMF before 200 OK
Author Message
Pirmin Offline
Junior Member
**

Posts: 2
Joined: Feb 2018
Reputation: 0
Post: #1
DTMF before 200 OK
Hello. It seems like Yealink phones would not support to send DTMF before they have received a 200 OK message. We tested this on a T46S with firmware 66.84.0.10 and with all possible settings for account.X.dtmf.type.

In our case the phone gets a 183 Session Progress with the SDP listed bellow. (All necessary things for sending DTMF are negotiated and sendrecv is set in the SDP, so there is no reason why the phone could not send any DTMF sequences). In Switzerland there are some telephony services for which one needs to confirm with some DTMF digits that the call should be established after an announcement has been played back about how much the call will cost (some quite expensive 0900 services), so this is quite an issue here...

Is there a config option that can be set on the phone to enable DTMF before 200 OK? It's working without any issues with devices from other manufacturers.

The SDP:

Content-Type: application/sdp
Content-Length: 223

v=0
o=- 20137 20139 IN IP4 10.10.10.1
s=Asterisk
c=IN IP4 10.10.10.1
t=0 0
m=audio 15314 RTP/AVP 8 101
a=rtpmap:8 PCMA/8000
a=rtpmap:101 telephone-event/8000
a=fmtp:101 0-16
a=ptime:20
a=maxptime:150
a=sendrecv

FYI: this seems to be a Firmware 84.X issue. A downgrade to 66.83.0.50 fixed the issue. An upgrade to 66.84.0.15 didn't help. (Like mentioned we originally tested with 66.84.0.10). So can you please fix this in fimre 66.84.0.X?
(This post was last modified: 04-03-2019 06:42 AM by Pirmin.)
04-03-2019 06:13 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
DTMF before 200 OK - Pirmin - 04-03-2019 06:13 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Formatted Text Screen allow DTMF on call GNIL 0 563 08-09-2018 04:16 PM
Last Post: GNIL
  dtmf problem koma 1 1,519 03-09-2018 09:06 PM
Last Post: Fraukas2
  T46G and DTMF tones not recognized tdr01 4 2,998 11-12-2017 04:18 PM
Last Post: tdr01
  T48 - DTMF not working when DSS keys are selected Freek Mooij 3 4,406 09-30-2016 05:10 AM
Last Post: Freek Mooij
  features.dtmf.duration mcooper06 1 2,352 11-18-2015 05:41 AM
Last Post: Yealink_Michael
  SIP INFO - can I also hear DTMF tones or some other touch tone? luckman212 5 6,715 06-06-2015 10:57 AM
Last Post: Flora_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication