[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T27G - Fall Back issues - Successive setting [Solved]
Author Message
BobBluePackets Offline
Junior Member
**

Posts: 10
Joined: Dec 2017
Reputation: 1
Post: #5
RE: T27G - Fall Back issues - Successive setting [Still an issue]
This issue returned a few days later - highly unusual

Since then have done a lot more testing and diagnosis (however but of the issue is that the system in question is in full production use, in a remote location, so normal range of diagnostics is a little restricted.

As I did before the work, all of this mechanism was tested and tested again, before this was put into production.

Since then, we have implemented a full test replica again in a lab setup. It works perfectly...with both systems online - Phone only registers to the Production PBX. Shutdown the production PBX, and the phone registers to the Backup PBX. Bring the Production back online, within a minute or two, the phone unregisters from the Backup PBX and registers back to the Production system

Have confirmed that the T27G Phones on both the Production system and the Replica that we setup are identical. FIrmwares identical, configurations identical (except for registration details) - using diff against exported configurations.

In case I have not mentioned it, it is using Asterisk based system - same versions.

Now to be fair, this does not look like a Yealink issue entirely, however it is only the Yealink with the failover capability. Anybody seen this issue before???
04-14-2019 05:24 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: T27G - Fall Back issues - Successive setting [Still an issue] - BobBluePackets - 04-14-2019 05:24 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  SIP-T27G and WF50 pdjhh 0 338 08-24-2020 04:34 AM
Last Post: pdjhh
  VP59 - Teams-to-Teams Federated User issues darwin.ranzone@originnet.com 0 492 07-23-2020 04:41 PM
Last Post: darwin.ranzone@originnet.com
  T27G - BT40 - CP700 jakthree 2 894 06-15-2020 04:08 PM
Last Post: jolouis
  T27G openvpn systems 4 3,771 03-16-2020 10:08 AM
Last Post: free2k
  T27G admin password Nenad 1 1,351 11-19-2019 02:24 PM
Last Post: complex1
  Possible to have T27P switch back to first page of DSS Keys after a period of time? Bobcat19 2 3,903 11-13-2019 07:37 AM
Last Post: Ajani_Exetel
  "Hold" + going back by "Resume" - audio is muted Babylonia 1 1,309 07-10-2019 08:25 PM
Last Post: Babylonia
  T27G firmware phnau 1 1,802 05-21-2019 10:19 AM
Last Post: complex1
  Screen Default Back to Page 1 Kiwi 0 1,030 04-16-2019 01:22 AM
Last Post: Kiwi
  Different users on the same phone on SIP-T27G econnet 2 2,402 01-02-2019 01:46 PM
Last Post: jolouis

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication