[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T27G - Fall Back issues - Successive setting [Solved]
Author Message
Jensen_Yealink Offline

Posts: 100
Joined: Jan 2012
Reputation: 0
Post: #3
RE: T27G - Fall Back issues - Successive setting [SOLVED]
(01-24-2019 12:45 AM)BobBluePackets Wrote:  We are working with two FreePBX systems - configuration is identical on the two, at least in terms of FreePBX/Asterisk base settings and Extensions settings - basically a poor mans redundancy

All phones are on the following firmware,, but we have also tested a few of the phones on the latest firmware (just in case).

The phones are auto provisioned, and we have setup the phones to work in fallback mode e.g.
1) SIP Server 1 and SIP Server 2 set (ip addresses for the moment - no DNS names used) - keeping it simple
2) No Proxy setup
3) Registration type set to 1 (successive) - not concurrent

Approximately 140 of 151 Yealink T27G phones Register with the Primary Server correctly and do not register with the Secondary Server (exactly what is expected)
Remove the Primary Server, and they all switch over to and register with the Secondary Server, bring the Primary Server online and within a short time, they are all registered back on the Primary server and deregistered with the Secondary Server

However I have 11 -13 of the T27G models that when brought online, they register to both Primary and Secondary (almost as though they are set to concurrent registration).

I have checked configuration, exporting the configuration from a unit that works correctly and one that does not - performed a diff and found no differences other than the password and extension number details.

Anyone else come across this issue....any thoughts....


Hi Bob,

Please try with below parameter and test:
Let me the result.

01-28-2019 06:16 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
RE: T27G - Fall Back issues - Successive setting [SOLVED] - Jensen_Yealink - 01-28-2019 06:16 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  SIP-T27G and WF50 pdjhh 0 276 08-24-2020 04:34 AM
Last Post: pdjhh
  VP59 - Teams-to-Teams Federated User issues darwin.ranzone@originnet.com 0 411 07-23-2020 04:41 PM
Last Post: darwin.ranzone@originnet.com
  T27G - BT40 - CP700 jakthree 2 784 06-15-2020 04:08 PM
Last Post: jolouis
  T27G openvpn systems 4 3,584 03-16-2020 10:08 AM
Last Post: free2k
  T27G admin password Nenad 1 1,206 11-19-2019 02:24 PM
Last Post: complex1
  Possible to have T27P switch back to first page of DSS Keys after a period of time? Bobcat19 2 3,794 11-13-2019 07:37 AM
Last Post: Ajani_Exetel
  "Hold" + going back by "Resume" - audio is muted Babylonia 1 1,209 07-10-2019 08:25 PM
Last Post: Babylonia
  T27G firmware phnau 1 1,672 05-21-2019 10:19 AM
Last Post: complex1
  Screen Default Back to Page 1 Kiwi 0 952 04-16-2019 01:22 AM
Last Post: Kiwi
  Different users on the same phone on SIP-T27G econnet 2 2,294 01-02-2019 01:46 PM
Last Post: jolouis

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication