New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit :

Post Reply 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How to use <user>@<domain> instead of <user>@<ip> ?
Author Message
oliv Offline

Posts: 62
Joined: Feb 2016
Reputation: 0
Post: #1
How to use <user>@<domain> instead of <user>@<ip> ?

Lately, I wondered if I could configure a Yealink phone to use a domain name instead of an IP address, in the domain part of a SIP URI.

I picked a v84-enabled T42S phone and successively set :
account.1.sip_server.1.address = ipbx1.foobar.lan
account.1.sip_server.1.address = ipbx1
account.1.sip_server.1.address =

Each time my server (an Asterisk instance) receives INVITEs or REGISTERs built with:

I would expect the above line to be respectively:
REGISTER sip:ipbx1.foobar.lan:5060 SIP/2.0
REGISTER sip:ipbx1:5060 SIP/2.0

Am I misunderstanding how SIP must work or is it something that can be configured ?

Best regards
01-17-2019 04:55 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 

Messages In This Thread
How to use <user>@<domain> instead of <user>@<ip> ? - oliv - 01-17-2019 04:55 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Default user password... starion 4 623 10-30-2019 05:25 PM
Last Post: starion
  Slow response when user presses buttons means phone number enters incorrectly chris.stewart 1 397 09-26-2019 06:58 AM
Last Post: Jacqueline250
  User-Agent not consistent across models ABP_Support 1 1,397 02-01-2018 01:56 AM
Last Post: Evan_Yealink
  Creating a user account is nearly impossible! Chinese 2 2,517 08-28-2017 06:23 AM
Last Post: Paul_Yealink
  How to control user capability to self-configure phone keys oliv 2 3,111 02-14-2017 06:10 AM
Last Post: Karl_Yealink
  Phone is busy while user press dial pad digits but didnt actually "Dial" yet amichy 8 8,553 01-12-2017 07:08 AM
Last Post: amichy
  Ability to see the user you are calling is already on the Phone bootmee 4 6,118 08-04-2016 07:27 PM
Last Post: jmoore
  New user question pharvey 4 5,025 04-10-2015 09:45 PM
Last Post: pharvey
  Network Unavailable Requires User Input lbroyles 3 5,993 10-14-2013 11:21 AM
Last Post: Yealink Support

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication