[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
MultiCast Paging CP860
Author Message
admin.calgary.demac Offline
Junior Member
**

Posts: 4
Joined: Aug 2015
Reputation: 0
Post: #1
MultiCast Paging CP860
For the life of me I can't figure out how to get multicast paging going on the CP860s.

Here is a list of things I have done so far, phones are auto provisioned with the following settings

Code:
multicast.codec = PCMU
multicast.receive_priority.enable = 1
multicast.receive_priority.priority = 0
multicast.listen_address.1.label = Page All
multicast.listen_address.1.ip_address = 239.1.1.1:5001

I have configure two CP860 with the same above settings. On one of the phones I setup a DSSKey as Multicast Paging with the following value: 239.1.1.1:5001 which was unsuccessful.

In order to eliminate my network as the issue. I setup my sip server with the following routing table:
Code:
Kernel IP routing table
Destination     Gateway         Genmask         Flags Metric Ref    Use Iface
0.0.0.0         10.50.70.254    0.0.0.0         UG    100    0        0 em1
10.50.50.0      0.0.0.0         255.255.255.0   U     0      0        0 em1.20
10.50.70.0      0.0.0.0         255.255.254.0   U     100    0        0 em1
169.254.0.0     0.0.0.0         255.255.0.0     U     1004   0        0 em1.20
224.0.0.0       0.0.0.0         240.0.0.0       U     0      0        0 em1.20

And setup a windows desktop on vlan 20, with network card assign to vlan 20 as the highest priority card.

I then setup ffmpeg to multicast with the following command:
Code:
./ffmpeg -re -i ./test.mp3  -filter_complex 'aresample=8000,asetnsamples=n=160' -acodec pcm_mulaw -ac 1 -vn -f rtp udp://239.1.1.1:5001

And then proceeding to VLC open a network stream with the address:
Code:
rtp://@239.1.1.1:5001

My Desktop pc was able to successfully pick up the stream.

When initiating a page from the phone the syslog logs as follows:
Code:
Aug 10 23:13:59 Log [841]: TALK<6+info  >Local IP Address:10.50.50.159
Aug 10 23:13:59 Log [841]: TALK<6+info  >Paging local_ip_address 10.50.50.159:11790

I have tried these test with the following firmware:
37.72.0.4
37.72.0.5
37.72.0.10
And all have been unsuccessful.

If there is anything that I could do to further test the issue, or if you require any more information please don't hesitate to ask.
08-11-2015 06:58 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
MultiCast Paging CP860 - admin.calgary.demac - 08-11-2015 06:58 AM
RE: MultiCast Paging CP860 - Infotec - 09-02-2018, 04:34 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  2-way paging with no indication on phone nolto 1 1,750 05-11-2023 11:20 PM
Last Post: Yisroel_MongoTEL
  Multicast / Paging / Intercom - Yealink T58 Ryandh 20 62,105 04-30-2020 03:23 PM
Last Post: Chris708
  Multicast Paging - Metaswitch EPP missing "Channel" ahull 1 6,364 11-27-2018 12:57 PM
Last Post: ahull
  Multicast options not in manual USTI 1 6,525 01-18-2018 10:22 AM
Last Post: complex1
  Multicast/Intercom Philip954 5 14,797 09-02-2017 09:01 PM
Last Post: Ryandh
  Multicast Paging force speaker jolouis 6 17,142 10-14-2016 10:15 PM
Last Post: jolouis
Information T28P Multicast Paging Volume fdtcloud 1 9,364 10-09-2014 08:14 PM
Last Post: Wilson_Yealink
  Muticast paging issues RyanW 5 20,501 02-25-2014 09:38 PM
Last Post: RyanW
  Multicast paging worked but no longer works plewis@bcradesign.com 3 13,819 08-13-2013 07:37 AM
Last Post: CWR
  Different paging rings? Crow2882 1 7,043 06-20-2013 02:18 PM
Last Post: Yealink Support

Forum Jump:


User(s) browsing this thread:

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication