[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
G722 not working on W53H W60B
Author Message
ricvil Offline
Junior Member
**

Posts: 12
Joined: Oct 2013
Reputation: 0
Post: #3
RE: G722 not working on W53H W60B
Did the upgrade and factory default but the issue continues.

Invite from Yealink to Asterisk has the below codec offer (G722 only):

User-Agent: Yealink W60B 77.83.0.25.
Allow-Events: talk,hold,conference,refer,check-sync.
Supported: replaces.
Content-Length: 213.
.
v=0.
o=- 20007 20007 IN IP4 192.168.4.2.
s=SDP data.
c=IN IP4 192.168.4.2.
t=0 0.
m=audio 12452 RTP/AVP 103 101.
a=rtpmap:103 G722/8000.

Asterisk accepts codec and connects call:
SIP/2.0 200 OK.
.
.
v=0.
o=root 184010779 184010779 IN IP4 192.168.4.1.
s=Asterisk PBX 1.8.23.1.
c=IN IP4 192.168.4.1.
t=0 0.
m=audio 14268 RTP/AVP 103 101.
a=rtpmap:103 G722/8000.
a=rtpmap:101 telephone-event/8000.
a=fmtp:101 0-16.

The yealink immediately sends a BYE back to Asterisk and the LCD screen on the W53H says "Not Acceptable".

To me this means a codec problem and given the same setup works fine with the W52, I am still inclined to blame the W53.

Thanks.
01-15-2019 09:03 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
G722 not working on W53H W60B - ricvil - 01-12-2019, 04:04 PM
RE: G722 not working on W53H W60B - ricvil - 01-15-2019 09:03 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  how to register a T58W with DD10K to a W60B? schogol 6 1,953 04-16-2024 09:54 PM
Last Post: schogol
  How to enable web server/ GUI on W60B and W70B after provisioning has disabled it. jhofford 2 3,337 09-12-2023 08:42 PM
Last Post: jhofford
  Problems setting up W60B and interface issues Ness 4 6,373 03-30-2023 05:24 PM
Last Post: Ness
  Auto Provision firmware on W60B base station hospitale 6 7,150 02-15-2023 05:54 PM
Last Post: hospitale
  recovery mode W60B files Aleskey 3 6,031 02-14-2023 01:42 AM
Last Post: 88fingerslukee
  W60B Constantly Restarts When W73H Is Connected. nolto 0 1,937 02-07-2023 12:15 AM
Last Post: nolto
  W60B factory reset and default login carsey 3 8,008 02-01-2023 02:52 AM
Last Post: complex1
  W60B remove intercom when transfert MYCOMPUTING 2 3,112 12-08-2022 12:17 AM
Last Post: complex1
  W60B base With 56H ( incomming calls, no ringing when charging ) stéphane 3 9,468 12-01-2022 03:15 AM
Last Post: therring
  W60B emitting high-pitched noise msncookie 6 13,239 09-19-2022 08:39 PM
Last Post: RobFromSouthJersey

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication