[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T48S used with power adapter AND POE
Author Message
mrfokus Offline
Junior Member
**

Posts: 4
Joined: Jul 2018
Reputation: 0
Post: #3
RE: T48S used with power adapter AND POE
(01-07-2019 06:15 PM)complex1 Wrote:  
(01-07-2019 04:36 PM)mrfokus Wrote:  Hi!
To lower the charge of our POE Switch I connected a DC power adapter DC 5V (not original but with the right voltage) with the T48S. Since then there is only the red light permanently on without any further function.

Did I convert my device the quickest way to e-rubbish?

Thanks a lot and happy new year to the IP specialistst!

Jürgen

Hi Jürgen,

Please note:

As stated in the Admin Guide:
If both PoE cable and power adapter is connected to the phone, then the IP phone use the PoE preferentially.

Warning message in the Quick Start Guide:
The IP phone should be used with Yealink original power adapter (5V/2A) only. The use of the third-party power adapter may cause the damage to the phone. Undecided

If the power LED indicator is on, the keypad is usable but the phone screen is black, please reboot your phone or try to reset the phone to factory default and try again.

Hope this will help.

Hi! Thanks for your quick response. I'm not sure if the keypad is still active. I think the phone is not booting any more. In that case do I have a chance to reset it? Or is it worth to repair it? I wouldn't throw it away if there is only a DCDC changer defect.

Thanks!!
01-08-2019 12:35 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: T48S used with power adapter AND POE - mrfokus - 01-08-2019 12:35 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T48s fw 66.84.0.15 Verizon - Need Recovery FW jonnya_ny 2 785 01-30-2024 05:23 AM
Last Post: jonnya_ny
  T48S DSS softkeys can only show two at at time afogul 0 466 12-09-2023 05:50 AM
Last Post: afogul
  T48S Handset logo and menu style jseeley 0 727 09-05-2023 08:52 AM
Last Post: jseeley
  T48S BLF Talking vs Ringing JordanHVRA 0 1,018 04-05-2023 01:31 PM
Last Post: JordanHVRA
Information Toggle Power LED or update config via remote? 48design-cg 0 1,079 01-17-2023 05:32 PM
Last Post: 48design-cg
  T48S Very Slow Response nolto 1 3,176 08-11-2022 05:51 PM
Last Post: complex1
  Yealink T48S won't factory reset djcartledge 3 5,113 07-16-2022 05:16 PM
Last Post: complex1
  Yealink T48s Firmware update failed dangmoss 2 7,391 02-19-2022 03:09 AM
Last Post: dangmoss
  Problem Change Firmware T48s from SFB to SIP Lars Maschke 2 6,481 01-14-2022 10:22 AM
Last Post: kumagera
  T48s setting outbound caller ID thunderzhao 1 5,043 09-10-2021 04:08 PM
Last Post: complex1

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication