EDK Setup on T46G

[alexgonzalez]

on point 2, you can do this, but it is two key strokes still roughly.
I set up a soft key to be Intercom, Softkey 4, is set to prefix, then value *80, label Intercom.
Then I can hit Intercom key on phones, and either enter the extension or pick that extension from the DSS.
I have phones set to auto answer. So when I hit Intercom key, phone goes to speakerphone immediately, and then I enter extension and other connected to other phone immediately, no ringing. Now if you call that extension by just pressing the DSS key, it does ring for the other person, and they have to manually answer their phone.

DSSkey, line key, I have one set for each extension. Only practical for like 20 or so extensions also to have all of them in there. But you can always type the extension after hitting the intercom key. I have some extensions set, example- type: BLF Value: 106 (extension) Label: 106 Robert Line: Line 1

on point 1, I will need to check on that.

Hope this helps.