T48 DSS Key - Can you share a config?

[cptjack]

By default Line Keys will point to the Lines configured in the mac.cfg file, like the user extensions.
To add shared Line Keys and override the default behaviour, you enter the configuration to the common.cfg file. For T48 you should add these to y000000000035.cfg

Skip Line Key 1 (leave options blank) to retain the default behaviour and start from the number of the shared keys (eg. 2):

Code:

################################################################################​#######
##                                   Linekey                                         ##          
################################################################################​#######
#The x of the parameter "linekey.x.line" ranges from 1 to 27.
#The default value equals to the value of x. For example, the default value of the parameter "linekey.1.line" is 1.
#linekey.x.lable--Define the label for each line key.

#Configure Line Key1
linekey.1.line =
linekey.1.value =
linekey.1.extension =
linekey.1.type =
linekey.1.label =
linekey.1.xml_phonebook =

#Configure Line Key2
linekey.2.line = 1
linekey.2.value = 123
linekey.2.extension = 123
linekey.2.type = 16
linekey.2.label = Sandra
linekey.2.xml_phonebook =

etc....

Type 16 means BLF. These common BLF keys will then be picked up by all T48 phones at autoprovision time.