New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
T46S Speed dial problem
Author Message
chrischevy Offline
Junior Member
**

Posts: 20
Joined: Nov 2014
Reputation: -1
Post: #1
T46S Speed dial problem
Strange problem here:

On a T46S with 66.84.0.10 firmware, I programmed a speeddial DSSKey with an external number. When I use it, I hear about one second of sound then the call becomes silent (but doesn't hangup).

If I dial the same number manually, everything is fine. I was able to reproduce the problem on 2 different systems (FreePBX) with 2 different T46s phones. For now, I only have one phone number that does this. It's probably related to the phone system of the person I'm calling, but the fact that everything is fine when not using the DSSKey speeddial is really strange.

Is there a difference between a speeddial and dialing a call manually ?

Ok I just found out something while analysing a capture: the speeddial DSS Key adds ** after calling. When dialing manually, I don't see the **

The FreePBX log confirms this:
DTMF begin '*' received on SIP/206-000056f4
DTMF begin passthrough '*' on SIP/206-000056f4
DTMF end '*' received on SIP/206-000056f4, duration 100 ms
DTMF end accepted with begin '*' on SIP/206-000056f4
DTMF end passthrough '*' on SIP/206-000056f4
DTMF begin '*' received on SIP/206-000056f4
DTMF begin passthrough '*' on SIP/206-000056f4
DTMF end '*' received on SIP/206-000056f4, duration 100 ms
DTMF end accepted with begin '*' on SIP/206-000056f4
DTMF end passthrough '*' on SIP/206-000056f4
(This post was last modified: 11-20-2018 05:08 PM by chrischevy.)
11-20-2018 04:39 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
T46S Speed dial problem - chrischevy - 11-20-2018 04:39 PM
RE: T46S Speed dial problem - chrischevy - 11-20-2018, 06:39 PM
RE: T46S Speed dial problem - chrischevy - 11-29-2018, 07:16 PM
RE: T46S Speed dial problem - jolouis - 12-03-2018, 02:24 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T48S/G dial plan sprintership 7 38 Yesterday 05:16 PM
Last Post: sprintership
  T46s - Directory capacity more than 1000? chusonisg 3 55 10-11-2019 01:53 PM
Last Post: complex1
  T46S Screen Timeout jferguso 3 60 10-10-2019 06:35 PM
Last Post: complex1
  IPv6 Problem DarrenWilliams 3 347 09-25-2019 08:58 PM
Last Post: justingoldberg
  T46S voicemail key not working (off hook) Advance2000 6 969 08-31-2019 07:29 AM
Last Post: rithvik
  T46S Holding OK button allows factory reset S J 4 9,638 08-01-2019 01:50 PM
Last Post: 4th Dimension
  T46S with Speaker with a cross over it icon ama 2 290 07-21-2019 09:44 PM
Last Post: ama
  T46S - call forward target (number) on display mikedonn 2 569 07-15-2019 02:43 PM
Last Post: mikedonn
  Transferring calls on Kixie using the T46S Ianlindgren 1 576 07-11-2019 01:04 PM
Last Post: Jacky_Yealink
  Changing the Hold function t46S Kala 1 375 06-24-2019 03:16 AM
Last Post: Simons_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication