New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18

We just had the YMCS online and we are also working on the features plan on the future versions, in this regard we are need to hear your voice about the YMCS.
Please visit : http://forum.yealink.com/forum/showthread.php?tid=42322


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Display steadily wakes up since update to FW 28.83.0.50
Author Message
smartpc Offline
Junior Member
**

Posts: 4
Joined: Mar 2017
Reputation: 0
Post: #1
Display steadily wakes up since update to FW 28.83.0.50
I just upgraded the Firmware from my T46G to 28.83.0.50 from 28.81.0.110. i use a pascom Telephonesystem which is build on Asterisk.

Normally the display dims after 300sec.abd stay dimed until a call or a blf event happens. After the Firmware Upgrade every 5-10 Minutes the Display wakes up to full light without happening anything.

This is only with the new firmware. Nothing is changed on the pascom Telephonsystem.

What is the problem?

regards, tobi
(This post was last modified: 11-10-2018 11:31 AM by smartpc.)
11-10-2018 11:30 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Display steadily wakes up since update to FW 28.83.0.50 - smartpc - 11-10-2018 11:30 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  T48S after Firmware update to 66.9.0.80 no Downgrade possible? thomas.hauff 1 116 Yesterday 03:06 PM
Last Post: East_Yealink
  T46S - call forward target (number) on display mikedonn 2 168 Yesterday 02:43 PM
Last Post: mikedonn
  T46s and T48s missing submenus after update mrchance 1 171 06-20-2019 01:59 PM
Last Post: complex1
  Firmware update failed, any options? srenton 0 169 06-03-2019 02:51 PM
Last Post: srenton
  Attended Transfer Doesn't Display Original CID Evzkyyy 2 305 05-11-2019 09:28 PM
Last Post: Tim_B
  Caller ID display for HOLD and PARK Neutro 2 448 03-14-2019 07:27 PM
Last Post: Neutro
  T46G display not working jraposinho 3 767 12-13-2018 03:44 PM
Last Post: complex1
  Default admin/admin don't work after Update to 66.84.0.10 hitzi 1 865 10-11-2018 03:27 PM
Last Post: complex1
  [T48] - NTP time update fails DennisT 0 687 07-17-2018 05:45 PM
Last Post: DennisT
  Update failed Bad Rom Blake1 3 3,373 05-15-2018 07:22 AM
Last Post: Kevin_Yealink

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication