New Forum system requires email address which you used to apply for your account to replace your original username. Password stays the same.Please see this post for more details
http://forum.yealink.com/forum/showthread.php?tid=40344

Yealink Test Club has been officially launched. Please visit post below to get detail information. Come and join us!
http://forum.yealink.com/forum/announcements.php?aid=18


Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Headset Prior (Yealink T21P)
Author Message
dreemer Offline
Junior Member
**

Posts: 3
Joined: Oct 2018
Reputation: 0
Post: #5
RE: Headset Prior (Yealink T21P)
(11-02-2018 06:36 PM)jolouis Wrote:  While I agree with you to some degree, the underlying problem is that you are making assumptions without actually reading the documentation.

The manual states:
features.headset_prior
0-Disabled, the headset mode will be deactivated after the call, if you switch the headset mode to speakerphone/handset mode.
1-Enabled, the headset mode will not be deactivated after the call, even if you switch the headset mode to speakerphone/handset mode.

So basically the option is only there to ensure that that headset mode does not get "switched off" by lifting the handset. (i.e. with this option disabled, if you were talking on a headset and then picked up the handset to talk, when you hung up again the phone would remain with headset mode OFF. With this option turned on, even if you pickup the handset to talk to someone, when you finish that call the Headset mode will re-activate, making sure the next call comes in on the headset again). It has nothing to do with what you are asking for.

There are two simple solutions to this problem:
1) Ditch the T21 and lifter, get a more advanced phone and headset that support EHS. This costs more $$ but is a much cleaner solution.This is the application/configuration modern headsets should be using.
2) Get a headset adapter/switch that will let you connect the headset inline with the handset. Connect this way and do not use the headset mode of the phone at all. This is the application/configuration lifters were designed to be used for.[/b]

Hey jolouis,

Thank you for your reply. We have opted to try an adapter (as you stated). If this does not work, we're probably just going to order new Cisco phones.

Thanks again.
11-05-2018 03:44 PM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
Headset Prior (Yealink T21P) - dreemer - 10-31-2018, 03:11 PM
RE: Headset Prior (Yealink T21P) - jolouis - 10-31-2018, 07:15 PM
RE: Headset Prior (Yealink T21P) - dreemer - 11-02-2018, 02:11 AM
RE: Headset Prior (Yealink T21P) - jolouis - 11-02-2018, 06:36 PM
RE: Headset Prior (Yealink T21P) - dreemer - 11-05-2018 03:44 PM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  Yealink T58A Firmware runek@sildelaget.no 0 421 07-04-2018 01:04 PM
Last Post: runek@sildelaget.no
  t46g: intercom over speaker rather than headset? asinshesq 22 25,374 01-24-2018 10:02 PM
Last Post: mikes
  T21P E2 Send softkey missing Mardy 1 1,381 06-19-2017 02:45 AM
Last Post: Jensen_Yealink
  Max USB stick size (for) Yealink SIP-T29G Shawn 1 1,468 05-17-2017 08:24 AM
Last Post: Lucia_Yealink
  T21P E2 Local Port Dalton 3 3,454 03-27-2017 05:50 PM
Last Post: VOIP
  T20 and T21p registration problem raltel 3 2,350 12-30-2016 06:01 AM
Last Post: Lucia_Yealink
  T21P E2 password reset winkey777 1 3,066 11-10-2016 08:59 AM
Last Post: Lucia_Yealink
  Yealink T19P Action URI denis 1 2,346 10-19-2016 09:07 PM
Last Post: denis
  Yealink phones rebooting perhaps caused by broadcast storm srcurtis 1 2,373 09-19-2016 05:17 PM
Last Post: Karl_Yealink
  Yealink XML Autentication with Mitel MX-ONE Telephony Server mpascuas 2 3,918 07-07-2016 05:15 PM
Last Post: jmoore

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication