[YMCS/YDMP Free Trial Program]Yealink would like to offer Free Trial Program of Yealink device management service for our current eligible customers. You can see the details below.
https://www.yealink.com/ydmp-freetrial-2020

Yealink Forums » IP Phone Series » General topics v » How to specify an IP range in the "PushXML allowed server" field?

Post Reply 
 
Thread Rating:
  • 0 Votes - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
How to specify an IP range in the "PushXML allowed server" field?
Author Message
nSolvePaul Offline
Junior Member
**

Posts: 21
Joined: Jul 2018
Reputation: 0
Post: #3
RE: How to specify an IP range in the "PushXML allowed server" field?
(10-31-2018 01:37 PM)jolouis Wrote:  Directly from the Administrators Guide manual:

Quote:Page 464 - push_xml.server Permitted Values:
Blank -The phone will reject HTTP POST messages from any server.
any -The phone will accept HTTP POST messages from any server.
IP address or domain name - Multiple addresses are separated by commas. (for example,10.1.4.3,10.1.4.23); Support asterisk wildcard, each asterisk represents a field of the IP address (10.10.*.* represents
10.10.0.0 to 10.10.255.255).

Thank you I'd missed that
11-02-2018 09:59 AM
Find all posts by this user    like0    dislike0 Quote this message in a reply
Post Reply 


Messages In This Thread
RE: How to specify an IP range in the "PushXML allowed server" field? - nSolvePaul - 11-02-2018 09:59 AM

Possibly Related Threads...
Thread: Author Replies: Views: Last Post
  From field user part incomplete on some outbound calls oliv 1 1,019 11-25-2022 06:14 PM
Last Post: oliv
  What is alarm server alarm.server.address ? (W59R) Ivan86 0 2,261 08-10-2021 04:42 PM
Last Post: Ivan86
  LDAP server is unavailable Andrei9385 2 7,968 07-16-2021 08:34 PM
Last Post: nolto
  T46s won't try to register to server on local subnet jigjag 0 3,337 09-08-2020 10:52 PM
Last Post: jigjag
  .cfg file needed for Zultys provisioning server jerryp 0 3,553 01-30-2020 09:26 PM
Last Post: jerryp
  Long range cordless phones Fraukas2 3 8,215 07-13-2019 02:42 AM
Last Post: Kevin_Yealink
  3CDaemon or TFTPD32 as a TFTP server nelson 1 8,156 08-23-2017 09:37 AM
Last Post: complex1
  my voice vlan can not recieve ip from microsoft dhcp server salar 1 7,169 06-23-2017 06:47 AM
Last Post: Kevin_Yealink
  [RESOLVED] Server initiated pushXML to port 443 alisio 3 9,302 01-29-2016 12:03 AM
Last Post: alisio
  ok to shorten server expires setting to 3 minutes? asinshesq 2 13,096 08-26-2015 07:53 AM
Last Post: asinshesq

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us   Yealink   Return to Top   Return to Content   Lite (Archive) Mode   RSS Syndication